China High Strength Powder E Glass Chopped StrMat Fiberglass

Chopped strand mat 225gsm, powder bonded, trimed edge or untrimed edge, it is soft mat, ease of manual tearing apart, good conformability; Good wet-through and fast wet-out in resins, rapid air release. Application: Hand lay-up. It is compatible with UP, VE, EP resins.
Product Introduction:
Chopped Strand Mat (CSM) is a random fiber mat that provides equal strength in all directions and is used in a variety of hand lay-up and open-mold applications. Chopped strand mat is produced by chopping continuous strand roving into short 1.5 to 3 inch lengths and dispersing the cut fibers randomly over a moving belt to from a "sheet" of random fiber mat. A binder is applied to hold the fibers together and the mat is trimmed and rolled. Because of is random fiber orientation, chopped strand mat conforms easily to complex shapes when wet-out with polyester or vinyl ester resins. Chopped strand mats are available as a roll stock product produced in a variety of weights and widths to suite specific applications.
Application:
It is uniformly bounded by powder or emulsion binder applying for hand lay-up,RTM continous moulding etc.
Mainly suitable for UP resin,vinyl ester resin,such various sheets and panel,boat hulls,bath tubs,cooling towers,anti-corrosion,vehicles etc.
Properties:
1.Even tickness moderated rigidness.
2.Easy wet out and impregnation.
3.Filament have outstanding anti-wash ability and easy wet out and impregnationg excellent process ability in moulded parts,applying for diversity moulding and processing.
4.Specially in opened moulding and closed moulding.
5.Excellent mechanical strength during production of finished product.
Technical data:

ITEMTECHNICAL
DATAMETHOD OF TESTINGTESTING
RESULTWeight(g/m2)225±10%GB6007227Average area weight deviation (%)±10GB60070.8Loss of ignition (%)2-8GB/99143.0Moisture content (%)<0.2GB119660.02Width(mm)1250±5.0GB7689.41250

Picture of Product:


Give us a chance, and we' ll return you with satisfaction.