Product Description
This two-component product is mainly prepared by inorganic silicone resin, special temperature-resistant and corrosion-resistant pigments, fillers, additives, solvents.
Packaging
Part A: 20 kg in a 20-liter iron barrel Part B: 2 kg in a 2-liter iron barrel.Construction parametersMixingMix the main paint evenly with a power mixer,stir,add curing agent until fully mixed.Normally,when the temperature is below 10℃,it will take 30 minutes for curing, higher than 10℃ will take 15 minutes to cure.Mixing ratioMain paint: curing agent = 20:2 (weight ratio)ThinnerHigh temperature resistant thinnerAirless sprayingNozzle diameter: 0.017~0.023 inchesGun pressure: 15~18MPaDiluent ratio: 0~10% (calculated by paint weight)SprayBrushingRecommended only for pre-coating and small-scale coating,but the required dry film thickness should be met.Roller coatingNot recommendedCompany ProfileApplicationWhy Choose UsFAQCertificationsCustomer PhotosContact