China High-temperature Resistant Coating Paint heat resistant anti-corrosion paint organic silicon resin

High-temperature Resistant Coating Paint

Product Description

Description

Prepared by organic silicon resin,heat resistant and anti-corrosion pigments, fillers, additives and curing agent.

Use

It is used as heat resistant mark coating for steel stack. Also apply to flue, drying tunnel and exhaust pipe.etc.

Feature

Excellent heat resistance(250℃)

Good anti-corrosion property, resistance to chemical atmosphere,aging, water-tolerant and insulating.

It is kind of crosslinking curing coating under room temperature, dry fast, easy to construct, and match well with heat resistant inorganic zinc silicate primer.

Product parameters

Drying time at 23±2℃surface dry:1hour; hard dry: 24hoursTheoretical soreading rate130~150g/square meters/coatStandard film thicknesswet film thickness:60~70μm/coat; dry film thickness :25~30μm/coatCoating interval at 23±2℃ 24hoursCoating methodbrush /roller/spray coatingPrevious Coating E06-500 heat resistant organic zinc silicate primer Shelf life12 months in dry and ventilated place with unopened conditionNumber of coattwocoat of primer +two coatof top paint, dry film thickness should reach 150μm; or four coats of top paint directly, dry film thickness should reach 100μm.

Substrate Treatment

Prelevel of primer should be totally dry without floaing dust and greasy dirt.

Cautions

This product is only for technician use. Workers must get trained before operation. All operations must follow technical directions from Bangjie Co. Ltd. Operators must wear self protection.Operation directions are based on current knowledge and experience. Any changes to directions must get approved by technical specialist of Bangjie Co. Ltd.

Health and Safety

Read safety direction on package carefully. Operate this product in ventilated condition, avoid over inhaling paint mist and spills on skin or eyes. If coating splashes on skin, rinse with proper detergent or soap water. If splash into eyes by accident, call emergence medical service immediately.

Why Choose Jianbang?

Why choose us?

1.Do specialized in R&D, production and sales of industrial heavy-duty coating.

2.With 17 years experience of personalized and specialized high performance anti-corrosive paint, and provides personalized anti-corrosion and application scheme for various corrosive medium and different corrosive conditions.

3.Small batch customization is available.

4.Qualified supplier of China National Nuclear Power, China National Petroleum Corporation, Sinopec Group, and Chinese Navy General equipment department

5.With strict quality control, the standard we manufacturing cold galvanized coating has become the industry standard in China.

6.Hi-tech enterprise and CCTV promoted brand.

7.Scientific research enterprise in cooperation with military industry and Industrial base of high-tech enterprises of national state of art coating

8.Domestic and international cooperation with Changzhou new material research institute of Beijing University of Chemical Technology and University of New South Wales in Australia. Engineering technology center of Marine anti-corrosive coating was established at the University of New South Wales.

9.We do have strictly quality control, and make sure the high quality from raw materials to production and shipment.

10.Best delivery time can be 15 days.

Company Information

Our Factory and workshop

R&D and Technology Center

Domestic and International Exhibitions

Production Flow

Packaging & Shipping

FAQ

Q:Are you a trading company or a factory?

Jiangsu bangjie anti-corrosion & insulator CO.,LTD is manufacturer.

Changzhou IMS new material technology CO.,LTD is our owner trading company.

Q: Can you provide the samples?
Yes, the sample is free.

And the transportation cost or freight need you to bear.

Q: Can you produce the product according to customers' requirements?
Yes, OEM is welcome.

We are a professional manufacturer of paint and coatings, include high temperature coatings.

Q: What’s your capacity?

100,000 tons per year.

Q: What's your delivery date?

It depends the purchase quantity.

Normally, 5-7days, for 1 x20’ GP after receiving the deposit and all the details /confirm/ied.

Q: What is the minimum order quantity?

Our minimum order quantity is 1000 KGS

Q: Can we mix the cargo loading in one 20ft container?

Of course, if the total quantity meets our minimum order quantity.

Q: What's the term of payment?

We prefer T/T 30% deposit, the balance 70% T/T paid before shipping.

Q: What countries give you the most business?

Our main target market is Indonesia, Mid-East and Southeast Asia. We also exported to Africa, as well as other countries throughout the world.

Q: Can we use our shipping agent?

Yes. We had cooperated with many forwarders. If you need, we can recommend some forwarders to you and you can compare the prices and service.

Q: Where is your factory located? Can I visit there?

It is located in Changzhou City Jiangsu PR, which is closed to Shanghai City.

Warmly welcome to visit us.