China Hikins Reverse Osmosis Membrane 9600g RO Industry Water Purification Treatment Filtration

TFC RO Membrane ELEMENTS
Packaging & Delivery
Packaging Details25 pcs per carton
1,350 pcs per pallet
13,500 pcs per 20" FCL
27,000 pcs per 40" FCL
Delivery Time - Within 2 weeks after receipt of payment
Specifications
Hikins is a group of factories manufacturing TFC RO elements and water treatment products in China for residential drinking water. 100% dry membranes. NSF58 certified.
Product specification spreadsheet:
1. Permeate flow and salt rejection based on the following test conditions : 250ppm (NaCl) softened tap water, 77°F(25°C), 15% recovery and the specified applied pressure.
2. Permeate flows for individual elements may vary +/-20%.
3. For the purpose of improvement, specifications may be updated periodically.
4. Supply by dry element for a longer shelf life.

Operating Limits
• Membrane Type Polyamide Thin-Film Composite
• Maximum Operating Temperature 113°F (45°C)
• Maximum Operating Pressure125psi (8.6bar)
• Maximum Feed Flow Rate 2.0 gpm (7.6lpm)
• Ph Range, Continuous Operation3.0 ~ 10
• Maximum Feed Silt Density Index <5
• Free Chlorine Tolerance <0.1ppm


Advantage

1. The membrane element is supplied in dry condition to have more shelf life (12 month)

2. The life of elements is much stable and longer

3. The membrane is manufactured by full automatic machine to keep quality assurance.

Operating and General Information
• It is recommended that system u sing these elements rinse the elements for 24 hours, prior to first use to meet NSF/ANSI 58 standard.
• The first full tank of permeate should be discard. Do not use this initial permeate for drinking water of food preparation.
• Keep elements moist at all times after initial wetting.
• If operating limits and guidelines given in this specification are not strictly followed, the limited warranty will be null and void.
• To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
• The membrane shows some resistance to short-term attack by chlorine (hypochlorite).
Continuous exposure, however, may damage the membrane and should be avoided.
• The customer is fully responsible for the effects of incompatible chemicals and lubricants on elements. Their use will void the element limited warranty.


Ro Membrane Performance data by NSF/ANSI Standard 58
The membranes are tested and certified by NSF international against NSF/ANSI Standard 58.
These elements have been tested for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Fluoride, Lead, Radium 226/228, Selenium, Turbidity and TDS.
Send your message to this supplier
Product specs spread sheet: