China Hsr Sr5700 Electric Robotic Arm Industrial Robot for Fast Picking Placing Sorting Assembly

HSR SR5700 Electric Robotic Arm Industrial Robot for Fast Picking Placing Sorting Assembly

Product Description

Specification

HSR-SR5700 Datasheet

Degree of freedom

4

Load

5kg/2kg

Maximum working radius

700mm

Repeated positioning accuracy

±0.02mm

Range of motion

J1

±132°

J2

±150°

J3

0-200mm

J4

±360°

Rated speed

J1

225°/s,3.92rad/s

J2

420°/s,7.32rad/s

J3

666mm/s

J4

1400°/s, 24.42rad/s

Maximum speed

J1

335°/s, 5.84rad/s

J2

600°/s, 10.46rad/s

J3

1111mm/s

J4

2000°/s, 34.88rad/s

Allowable inertia moment

J4

0.12kg/0.01kg

Allowable torque

J4

4.23Nm

Application environment

Temperature

0-45°

Humidity

20%-80%

Others

Avoid contact with flammable, explosive or corrosive gas and liquid, and stay away from electronic noise sources (plasma)

Cable length of teach pendant

8m

Body-cabinet connection line length

3m

I/O parameter

Digital quantity: 32-bit input (both NPN and PNP) 31-bit output (NPN);

Main body reserved signal line

12 bits (aviation plug connection)

Reserved gas circuit

3*Φ6

Battery capacity

0.8kVA

Rated power

0.62KW

Rated voltage

Single phase AC220V 50HZ

Rated current

3.2A

Main body protection level

IP54

Electric cabinet protection level

IP20

Installation method

Ground installation, desk installation

Body weight

22.5kg

Electric cabinet size

319(wide)x280(thick)x145(high)-can stand-can stand or lie down

Electric cabinet weight

10.65kg

Product Features

SR5700 Robot Travel Range

The HSR-SR5700 robots

It is a small and light robot, which has precision and a variety of load capacities, which has more flexible movement.

High integration and high precision

The built-in signal line and the air pipe of the main body are plug and play. There's not complicated wiring, and the internal cable won't slip, which can guarantee ZERO fault for a long time.

Except the use of high-precision harmonic reducer, the robot uses imported high-precision ball and screw ball spline. The end

repeat positioning accuracy can reach to ±0.01MM.

High speed performance

Using low-speed ratio and high-precision reducer with ultra-fast cycle time and the fastest cycle time can be up to 0.35S

High smoothness and high rigidity

This robot uses advanced control system and servo drive system to achieve high-speed and smooth motion performance, and the

transition point is almost zero-time pause.

Its linear movement axis at the end gives it a good stiffness in the Z direction, which is especially suitable for assembly work.

Cost-effective and long service life

Low cost!

This industrial robot can be reprogrammed for handling and assembly.The costs can be recovered in one year.

Long service life!

Using high-precision and high-rigidity harmonic reducer which can be used for several decades. once you buy, you can get benefit for decades.

Application

Electronic assembly line

Glueing for laptop

Manual uploading

Company Profile

Q1: What is the advantage of SR5700 robot ?

A1: Compared to other convetional robots, our HSR-BR robot has advantages below:

1. Cost-effective
Low cost, What you buy is a general industrial robot, which can be reprogrammed for other handling, assembly operations,.The costs
can be recovered in one year.
2. Long service life
Using high-precision and high-rigidity harmonic reducer which can use last for several decades. once you buy, benefit for decades.
3. High speed performance
Using low-speed ratio high-precision reducer with ultra-fast cycle time and the fastest cycle time up to 0.35S
4. High integration
The built-in signal line and the air pipe of the main body are plug and play, no complicated wiring is required, and the internal
cable has no slip, and the fault-free rate can be maintained for a long time.
5. High precision
Except the use of high-precision harmonic reducer, the imported high-precision ball screw ball spline is also used, and the end
repeat positioning accuracy is reaching ±0.01MM.
6. High smoothness
The advanced control system and servo drive system are used to achieve high-speed and smooth motion performance, and the
transition point is almost zero-time pause.
7. High rigidity
Its linear movement axis at the end gives it a good stiffness in the Z direction, which is especially suitable for assembly work.
8. Load position practicality
According to the actual end load, the customer can adjust the load position and simple operation to improve the robot's running
tempo. "
Q2: How can we guarantee quality?
A2: Our products have CE certification and strict quality control process, there is always a pre-production sample before mass production. Always final Inspection before shipment.
Q3: what services can we provide?
A3: Accepted Delivery Terms: FOB
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C;
Language Spoken:English,Chinese,Russian, Spanish