China Incremental Encoder Water-Proof Encoder Rotary Encoder

Product Description
Incremental model encoder is a speed and displacement sensor integrating optical, mechanical, electrical technologies, when the encoder drives Hydraulic Press the optical grating disk to rotate, the length, angle, speed can be measured accurately by converting the grating lines number into pulses numbers.
Model Meanings:Specification
CHG38S seriesModelCHG38S-N/E/F/L-(5,10,50,60,100,200,300,360,400,500,600,800,1000,1024,1200,2000,2500)Main sizeExternal diametCleaning Swab er:φ38mm; Shaft diameter:φ8mmWorking powerDC5V-2Packaging Materials 4V
Output modeN: Open-collector output (NPN)E: Voltage outputF: Complementary outputL: Drive outputPulse output5,10,50,60,100,200,300,360,400,600,800,1000,1024,2000,2500Heater & Heat Exchanger Output phaseA B Z or A B Z -A -B -ZTermination modeG:Side entry cableApplicationStone machinery, robots and other automation fields
Dimensions
Working principleProduct Details
Adopt imported bearing, have more stable performance, shaft lock adopt stainless steel with nickle plated with rust proofAdopt interference fit joint, no screw connection, have a nice outlooking, housing surface adopt sandblasting oxidation, antiwear and rust-proof.Aluminum housing, shielded cable connection is available.Product packingOur factoryPrecaution
1). This product is consists of high-precision parts, be sure to handle with utmost care, do not drop.
2). When mounting this product, if decentering tolerance or declination tolerance is too big, may
result in reduce its working life.
3). Make sure that the product is free from impact, vibration, corrosion, high magnetic field, high
temperature, high humidity and acid-alkaline environment.
4). Unnecessary pulses are output when turn ON or OFF, be sure to turn ON the peripheral devices
connect to the encoder 0.5S after turning ON the encoder, and turn OFF the peripheral devices
0.5S before turning OFF the encoder.
5). After wiring the cable with the encoder securely, do not pull the cable with 29.4N or more.
6). If it is near to high voltage line or power supply cable, please use cable tube to cover the wires.
7). When wiring the cable, be sure no short connect between each cable, do not make mistakes in the
wiring, otherwise the encoder may be Industrial Customized Service damaged.
It is suggest to make proper insulation for the cable which is not required for connection
9. Precaution
8). Shielded cable should be proper grounded.
9). Do not disassembly the product
Please contact us for more product information