China LED Controllers with Web Console to Send Street Light Alarm

LED Controllers with Web Console to Send Street Light Alarm

Brief introduction

WE-CON-10 is the latest development of the mains street lamp single-lamp controller. The communication method adopts narrow-band LoRa technology, which has long communication range, high sensitivity, strong anti-interference performance and low power consumption. The product has single-lamp intelligent switch and dimming function, power parameter monitoring function and energy saving income analysis. With the Lampmind: intelligent street lamp system, the smart management of street lamps can be easily realized.

Features

0-10V/PWM dimming
Self-adaptive light control
Power parameters monitoring
Over-voltage and over-current protection
Lightning protection
Anomaly alarm
Lampmind system

Technical parameters

Input voltageAC85V~265VOutput voltageAC85V~265VOutput current5.2ADimming way0-10V/PWM dimmingCommunication protocolLoRaWANWorking frequency470M/510M/868M/915MTransmit power17dBSensitivity-142dB(±1dB)Antenna gain3dBPower parametersvoltage,current,power factor,powerDimension170L*50W*35H(MM)IP levelIP65External connectionnormal connection

Wiring way:
Controller input (three-core wire):
Live wire: brown Neutral line: gray Ground wire: green
Controller output(five-core wire):
Live wire: black Neutral line: grayPWM+: brown0-10V+:blue GND: green
Product show
What can the system do?




Company and factory info
Exihibition show
Cases around the world



FAQ:
1. What's the protocol controller and gateway used?
Standard LoRaWAN protocol.
2. What frequency controller and gateway support?
470M/510M/868M/915M.
3. What are the requirements for light to install the system?
Lights must have a dimmable driver capable of receiving either 0-10VDC or PWM dimming signal.
4. What's the max light power controller can support?
Below 800w for now. So it also can be used for High Mast lights.
5. Where should be light controllers installed?
There are two controllers for options. WE-MA-10 can be used for lights with NEMA interface while WE-CON-10 can be installed inside lights that without NEMA interface or in transformation project.
6. How should I cofigure light controllers network in order to establish server connection?
There is no need for any configuration. once the controllers are installed they start the communication and establish connection with central server software automatically.
7. Where can be installed network gateway?
Gateway can be installed any highest location within radio coverage of light controllers network.
CE certificate: