China Liquid RTV2 Mold Making Silicone Rubber

Liquid RTV Silicon Description
1. Non-exothermic
2. Mold-releasability
3. Dimensional stability
4. Excellent Flowability
5. Heat and chemical resistance
Liquid RTV Silicon application:
Liquid RTV Silicon compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.
Liquid RTV Silicon feature description:
A. Workability
The base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted.
B. Mold-releasability
The cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc. ) are unnecessary.
C. Dimensional stability
These rubbers offer good dimensional stability, with little shrinkage.
D. Flowability
They have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.
E. Heat and chemical resistance
These rubbers have outstanding resistance to heat and chemicals.
F. Deep-section curability
Moldmaking RTV silicone rubber compound cures uniformly throughout the mold, regardless of thickness
G. Non-exothermic
No heat is generated during curing, meaning no adverse effects to the original.
Liquid RTV Silicon operations
If the customer wants to make large products and large size molds, the mold should be made of silicon rubber with high hardness. On the contrary, if the mold with fine and precision patterns, it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demold, more curing agent is needed; Contrarily, if molds requiring slower drying and demold, less curing agent is needed.