China Lithium Battery X-ray Inspection Equipment

USAGE
Observe and measure positioning holes on the PCB, to check whether the holes
Between layers are deviated, a variety of conditional measurement can be
Conducted on the images, including the distance from the center of a circle to
Another, from one point to another, circle area, etc., and make judgement pre-set
Parameters.
CHARACTERISTIC
1. Using the principle of X-ray projection & imaging to observe and measure the
Positioning holes on the PCB.
2. CAN network computer control system, simple operation.
3. Eqiupped woth CCD navigation functions, to facilitate moblie test, and quickly
Search the test objectives.
4. Sealed micro focus X-ray tube and a variety of image processing techniques
And software to reduce the image distortion.
5. Image can be measured under different conditions, such as the distance from
The center of concentric circles, point to point distance, circle area, etc.

Item ModelXG 5 000

Tube
Focus size5 umTube Voltage90kVTube current2 0 0μA ( software restriction 89 μA )Cooling modeStrong wind coolingimagingsystemfield2 " / 4 "DPI75/110 lp / cmX-CCD resolution1392 X 1040 pixelsGeometric Magnification12-48 Xobjectivetablestandardsize460 mmX410mmEffective detection area400 mmX350mmloadcapacity≤5K gSafety standardRadiation international safety standards≤1 usv/hrOthersComputer22 " LCD display/ I3 processorSize and weight1028X1025X1840 mm750K gPowerAC220V 10A Temperature and humidity22±3du50%RH±10%RH