China Magnetic Lock for Automatic Doors

Characteristic of Magnetic Lock for Automatic Doors
▪Special design and suitable for Auto door
▪The standard voltage is DC 12V when product
▪No fault diagnosis, safety, durable
▪Professional design, installation easily, adjust convenient
▪Select produce by auto door manufacturer
Installation
•Installation hole should be fixed according to magnet base. The magnet base position should be adjusted according to the actual installation.
•Position of auto door pulley should be fixed according to magnet body by adjust the distance. Magnet body and magnet base should be the same vertical position.
Picture of Magnetic Lock for Automatic Doors
Technical parameters

Input voltage12DC/(24VD)Operation current12V/170mA 24VHolding force70kg(150lbs)Surface treamentEnvironmental chromium platingOperation temperature-20~55ºCOperation humidity0-90%Lock50(diameter)x30(H) mmMagnet50(diameter)x10(H) mm

Other Accessoties of Automatric Doors
1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.