China Marine Grade Aluminum Angle Bar

Marine Grade Aluminum Angle Bar (5083/5086/5383//6061/6082)
5083 and 5086 are non heat treatable alloys. The mechanical properties of the alloy depend on the chemical composition of the alloy and the hot rolling temperature. The supply status of marine 5083 and 5086 alloy is O, H111 and H112. Among them, the latter is resistant to stress corrosion, and can prevent the tropical climate from intergranular corrosion cracking.

6061 and 6082 aluminum alloys are widely used as light structural materials and widely used in transportation materials. 6061 and 6082 alloy extrusion products need any double base heat treatment for age hardening. The working procedure is as follows: heating billet, extrusion, profile quenching, solid solution treatment, straightening, aging in furnace. only by strictly controlling the technological parameters of each process can a satisfactory mechanical performance be achieved.

Marine Aluminum Angle Bar Specification
Alloy: 5083, 5086, 5383, 5059, 6061, 6082,6005A
Temper: H111/H112, T5/T6
Certificate: BV /DNV /ABS/Lioyds
Thickness: 3mm---50mm

Marine Aluminum Angle Bar Aluminum Alloys CompositionAlloySiFeCuMnMgCrNiZnTiGaOthersAluEachToal 50830.400.400.10.4-1.04.0--4.90.05--0.25--0.250.15--0.050.15Remainder53830.250.250.200.7-1.04.0-5.20.25--0.400.15--0.050.15Remainder50860.400.500.10.2--0.73.5-4.50.05-0.25-0.250.15-0.050.15Remainder50590.450.500.250.6-1.25.0-6.00.25-0.40-0.90.20-0.050.15Remainder60610.4-0.80.70.15-0.400.150.8-1.20.04-0.35-0.250.15-0.050.15Remainder6005A0.50-0.90.350.300.500.40-0.70.30-0.200.10-0.050.15Remainder60820.7-1.30.50.10.4-1.00.6-1.20.25-0.200.10-0.050.15Remainder

Mechanical Properties of Marine Aluminum Angle BarAlloyFormThickness(mm)TemperRmRp0.2
(Mpa)A% MinMin. AA5086Shapes, Bar, Tube3≤t≤50H1122409510125083Shapes, Bar, Tube Shapes, Bar, Tube3≤t≤50 3≤t≤50H111
O and H112270 270110 12510 1012
125059Shapes, Bar, Tube3≤t≤50H112330200 105383Shapes, Bar, Tub3≤t≤50O2901451717Shapes, Bar, Tub3≤t≤50H112310190 136061Shapes, Bar, Tube Profiles3≤t≤50 3≤t≤50T5 or T6
T5 or T6260245240 205108
46005AShapes, Bar, Tube Profiles3≤t≤50T526021598Shapes, Bar, Tube Profiles3≤t≤10T62602158610≤t≤50250200866082Shapes, Bar, Tube Closed shapes3≤t≤50 3≤t≤50T5 or T6
T5 or T6310 290260 240108
5

Marine Aluminum Angle Bar Mould List

Material CodeA(mm)B(mm)T(mm)R1R2Kg/mTP-179719.51.000.069TP-9398122.000.13CAM_A00002610151.000.065CAM_A00018510152.000.124TP-50010201.200.116ALD_D00198210201.600.123CAM_A00032110202.000.151CAM_A00058610252.000.178CAM_A00018810302.000.205CAM_A00019210402.000.259CAM_A00076710452.000.286AUS_D00074712201.200.1ALD_D00388212201.600.131AUS_D00066812201.600.131ALD_D00390712203.000.235AUS_D00066712203.000.235ALD_D00309612251.200.116ALD_D00309812253.000.275TP-95412302.500.267ALD_D00054112403.000.397CAM_A00126812.719.053.180.245CAM_D00473712.725.41.570.155CAM_A00102912.725.43.180.299CAM_A00002715201.500.136CAM_A00018615202.000.178TP-44115202.000.178TP-20015252.000.205CAM_A00018715252.000.205CAM_A00065615253.000.3TP-87815301.50 0.50 0.18