China Maximum Slotting Distance 500 mm Hydraulic Slotting Machine

1. This hydraulic sloting machine is widely used to machine flat surfaces, mould surfaces (including arc surfaces), key slots in tapered holes, key slots in cylindrical holes, splines, squre holes and polygonal holes on parts. It can also slot parts set to an inclination angle in the range of 0 10 Degrees. This hydraulic slotting machine is espeically suitable for machining key slots in blind holes or holes with shoulders (i. E., stepped holes). This hydraulic slotting machine is popularly operated in the single-piece or small-batch production in workshops;
2. The worktable on this hydraulic slotting machine feeds in three directions- the longitudinal direction, the cross direction and the rotary direction thus the multiple surfaces on a workpiece can be machined in one single setup of the workpiece;
3. The slotting ram's reciprocation is driven by a hydraulic cylinder and the hydraulic transmission mechanism. The ram keeps a constant speed in every travel to perform stable slottings and its speeds and the worktable feeding speeds can be steplessly adjusted.
4. The hydraulic control console has the direction-changing mechanism to reciprocate the ram's motion. The worktable can be moved both hydraulically and manually. The worktable can also be automatically fed and perform rapid trasverse driven by a special electromotor on this hydraulic slotting machine.
5. This slotting machine integrates the advantages of the mechanical control & drive, the electrical control & drive, the hydraulic control & drive to perform very convenient and easy operations.

SpecificationsSM500YE UnitMax. stroke length of ram500mmMin. stroke length of ram125mmMax. slotting length500mmDistance of vertical adjust of ram430mmExtreme high speed for work stroke of ram22m/minExtreme low speed for work stroke of ram3m/minSpeed ratio of work stroke and return stroke of ram1:1.45 Speed adjust for work strokeStepless Max. slotting force19.6KNDistance from tool holding surface to column front1032mmDistance from worktable surface to underside of slide rack740mmMax. longitudinal travel of worktable1235mmMax. transverse travel of worktable820mmDiameter of worktableφ900mmInclination of ram0 - 10DegreesRange of longitudinal feed (stepless)0 - 0.6mmRange of cross feed (stepless)0 - 1.36mmRange of rotary feed (stepless)0 - 1°15'DegreesMax loading weight on worktable2000kgT-slot width in the center of worktable22H8mmmain motor11KWcoolant pump motor0.04KWNet weight (approx)11000kgDimensions of machine tool (L x W x H)3460 x 2130 x 3720mm