China Maximum Slotting Length 630 mm Hydraulic Slotting Machine

1. This sloting machine is widely used to machine flat surfaces, mould surfaces (including arc surfaces), key slots in tapered holes, key slots in cylindrical holes, splines, squre holes and polygonal holes on parts. It can also slot parts set to an inclination angle in the range of 0 10 Degrees. It is espeically suitable for machining key slots in blind holes or holes with shoulders (i. E., stepped holes). This slotting machine is popularly operated in the single-piece or small-batch production in workshops;
2. The worktable feeds in three directions- the longitudinal direction, the cross direction and the rotary direction thus the multiple surfaces on a workpiece can be machined in one single setup of the workpiece;
3. The slotting ram's reciprocation is driven by a hydraulic cylinder and the hydraulic transmission mechanism. The ram keeps a constant speed in every travel to perform stable slottings and its speeds and the worktable feeding speeds can be steplessly adjusted.
4. The hydraulic control console has the direction-changing mechanism to reciprocate the ram's motion. The worktable can be moved both hydraulically and manually. The worktable can be automatically fed and perform rapid trasverse driven by a special electromotor on this slotting machine.
5. This slotting machine integrates the advantages of the mechanical control & drive, the electrical control & drive, the hydraulic control & drive to perform very convenient and easy operations.

SpecificationsUnitSM630YEMax. stroke length of rammm630Min. stroke length of rammm125Max. slotting lengthmm630Distance of vertical adjust of rammm550Extreme high speed for work stroke of ramm/min22Extreme low speed for work stroke of ramm/min5Speed ratio of work stroke and return stroke of ram 1:1.45Speed adjustment for work stroke SteplessMax. slotting forceKN19.6Distance from tool holding surface to column frontmm1189Distance from worktable surface to lower end of rammm880Max. longitudinal travel of worktablemm1125Max. cross travel of worktablemm880Diameter of worktablemmØ1000Inclination of ramDegrees0 - 10Feed range of worktable in longitudinal & cross directionsmm0 - 0.6Rotary feed range of worktableDegrees0 - 1°15'Max. weight of workpieceskg2000T-slot width in the center of worktablemm22H8Power supply of main electric motorKW11kW; 960r/minPower of motor for rapid traverseKW1.5kW; 940r/minType of motor for cooling pump DB-12B 40W 380VNet weight (Approx.)kg12000Gross weightkg12900Dimensions of machine tool(LxWxH)mm3730x2350x4587