Mold liquid silicone rubber
Introduction of mold liquid silicone rubber:
1. Two-part of mold liquid silicone rubber: Flowable liquid silicon and curing agent.
2. Mold liquid silicone rubber cures at room temperature within 4-6 hours.
Features of mold liquid silicone rubber:
1. Mold liquid silicone rubber has an exceptional fluidity and good operability.
2. Mold liquid silicone rubber has good temperature and deformation resistance as well as low shrinkage.
3. Mold liquid silicone rubber has high duplication times.
Users instruction of mold liquid silicone rubber:
1. Added with 1% of curing agent, mold liquid silicone rubber can still flow within 2.5 hours, mold can be released in 6-8 hours.
2. Added with 2% of curing agent, mold liquid silicone rubber can still flow within 50 minutes to 1 hour, mold can be released in 23 hours.
3. Added with 3% of curing agent, mold liquid silicone rubber can still flow within 28-30 minutes, mold can be released in 1.52 hours.
4. Added with 4% of curing agent, mold liquid silicone rubber can still flow within 10-15 minutes, mold can be released in 11.5 hours.
If you need more information about mold liquid silicone rubber, pls contact us at any time.
Model630#AppearancewhiteMixing proportion of curing agent (%)5%Operating time (mins 25 0C )20-40Curing time(hours 25 0C)3-5Hardness (A°)30±2Density ( g/cm 3 )1.08Viscosity (Mpas -25 0C)27000-32000Tensile-strength(kgf /cm2 )≥40Tear-strength (kgf /cm )≥30Elongation-break(%)≥ 450Retractility(%)≤0.3
For more information, pls contact Ms Katie
Mob:+86 189 3886 7557