China No Crimp Biaxial Fiberglass Fabric with PP for Nacelle

1080GSM No crimp biaxial 0 and 90 orientation fiberglass mat for necellecove, Fiberglass combo mat has allowed for faster fabrication of parts with better physical and mechanical properties. Parts made from these reinforcements have LED to cost effective solutions for a variety of applications including Necellecove, marine, transportation, infrastructure, sports and recreation and aerospace.
Combomat with PP 1100 is a 1080G/M2 stitch bonded composite reinforcement fabric containing a PP layer inside the fabric, the fabric consists of 4 layers: Direct roving in 0 degree and 90 degree directions, a PP non-woven layer in the middle, and chopped strands on the outside of the PP layer.
It is no any binder, no intersections of weft and warp, no crimp, so characterized by its optimal mechanical performance.
The specification is 600GSM roving in 0/90 degree direction, 300GSM mat. PP in the middle.
It is suitable for vacuum.
Technical data:

IdLayerUnit1234Stitching2.1Fibre orientationDegrees0±390±3Non-wovenCS 2.2Nominal area weightg/m²300 ±5%300 ±5%180 ±5%(177)300 ±5%(602)102.3Roving/yarn weighttex1200 ±60 (1230)1200 ±60
(1233)-33 subtex
(33.7)150 dtex
(148)2.5Av. filament diametermm17(17)17(17)-13(13)Polyester(textured)2.6Roving type-Direct roving
(Yes)Direct roving
(yes)-Assem-bled roving
(yes) 2.7Resin compatibility UP, VEUP, VE UP, VE 2.8Stitching type Tricot, chain2.9Space between needles Gauge 72.10Stitching length 4.0mm

Packing & Storage:
Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.The pallet shall no be higher than 2 layers.
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.
Picture of Product:

CHANGZHOU UTEK COMPOSITE COMPANY CO.,LTDCOMPANY INTRODUCTION:Company NameCHANGZHOU UTEK COMPOSITE CO.,LTDAddressFuhanyuan 1-814,Taihu Road,Changzhou,Jiangsu,ChinaContact PersonNameTel MangerGong Xiaojun0086 13357899376 Business ConditionManufactureTradingConsititution of companyPvt.LtdAnnual turnoverUSD10,000,000Company Occupy Areas(M2)3000M2Shower room Occupy Areas(M2)200M2websitewww.utekcomposite.comhttp://utekcomposites.en.made-in-china.com/Mainly Customer & MarketingEurope,Asia,America,Middle EastMainly ProductFiberglass chopped strand mat (powder and emulsion), stitch mat, combo mat, uni-direction and biaxial fabric, RTM core mat, woven roving, special products like Ar-glass roving, chopped strand, thin fiberglass fabric, SMC(sheet molding compound), fiberglass/polyester geogrid and geocomposite. fiberglass mica fabric for insulation.Sales Team15(University Graduates)Product Team150Research & Development Team12QC Team8CertificateISO 9001 ,ISO 14001 ,SGS

Give us a chance, and we' ll return you with satisfaction.