China PLC Control Maximum Slotting Length 630 mm Slotting Machine

1. This slotting machine is widely used to process flat surfaces, mould parting surfaces and key-slots on parts. It is especially suitable for the single-piece production or the small-batch production in workshops;
2. Double cranks on this slotting machine provide stable motions for the ram in slotting operations;
3. The worktable is controlled and driven by the feeding system integrated with the PLC control system and the servo motor. And the worktable can be power driven to rotate and postion the workpiece accurately. Thus multiple key slots on a workpiece can be conveniently slotted by continuously feeding the worktable with the feeding data simutaneously shown on the displayer; DD
4. The start and stop of this slotting machine is controlled by the electromagnetic clutches;
5. Oil pump supplies lubricant to all the lubrication positions on this machine;
6. This slotting machine is designed elaboratedly with high standardization, serialization, generalization and high automation grade and featured with the compact and harmonical structure, pleasing appearance and convenient maintenance.

SpecificationsSM630CUnitMax. slotting length630mmNumber of ram strokes(per min)8,12,20,30r.p.mMax. cutting force20000NInclination of ram head±10°degDistance between tool holding surface and colunmn front1120mmT-slot width on worktable22H11mmDistance between worktable surface and the lower end of ram800mmMax. longitudinal travel of worktable1000mmMax. cross travel of worktable700mmRange of table longitudinal and cross feeds per ram storke0.10, 0.20, 0.32, 0.54, 0.80, 1.30Rang of worktable rotary feed (minutes and seconds per ram storke)3', 6', 9'36", 16'12", 24', 39'Diameter of the worktable1120mmMax. weight of workpieces2000kgPower of main drive motor10kwPower of feed servo motor4.0kwRam position adjusting motor0.55kwMachine net weight (Approx.)11Metric TonsOverall dimension (L x W x H)3580 x 2390 x 3660mm