China PNP Photoelectric Sensor Diffuse Type Sensor Photoelectric Switch

E3F-DS10C2DescriptionC-lin Brand photoelectric proximity sensor switch is a displacement sensor with switching output, output mode have NPN, PNP, NO, NC and relay etc, it can be detect metal (such as iron, steel, copper) object, plastic, glasEngineering & Construction Machinery s, wooden, water, paper, magnetic etc. transparent or opaque objects, can be connect with PLC, servo controller, frequency inverter, counter, controllers to achieve the purpose of automatic signal input control. It is widely used in the field of machinery, textile, light industry, papermaking, printing, packing industries.Thereare threedifferentsensing mode:throughbeam type,retroreflective type,anddiffusedtype.Athroughbeam type photoelectric sensor consistsofa emitter and a receiver. Due to theManipulator separately arrangement of the emitter and receiver, the sensing distance is greater than others, the operating distance can be 1m to 10m or more.Aretroreflectivearrangementplacesthetransmitterandreceiveratthesamelocationandusesareflectortobouncethelightbeambackfromthetransmittertothe
receiver.AnobjectissensedwhenthebeamisinterruptedandfaGPS ilstoreachthereceiver.A diffuse type photoelectric sensor can detect any reflective object, in this mode, an object is detected when the receiver receves the transmitted light or fails to receive it
Model Meanings
SpecificationInsulation
Product InformationNameDiffuse type photoelectric sensorProduct PictureModelE3F-DS10C2
Power SupplyDC 6-36VSensing Distance10cm±15% (non-adjustable)Response time2.5msDetect ObjectAny reflective objectOutput modeDC NPN NCOutput currentMax. 100mADegree of protectionIP54DimensionsCase materialHeat-resistance ABS
Protection circuitSurge protectionVoltage drop<10VCurrent consumption<10mACable length1.5mStandard sensing object5x5cm white paperProduct Details
ApplicationsWiring diagram
Maintenance and Inspection
In order to ensure long-term stable operation of the photoelectric switch, please carry out the following periodic inspections;1. Check that the installation position of the detection object and the photoelectric switch is offset, loose, and deformed.2. Check the wiring, whether the connection part is loose or not, and the contact is broken.3. Check Electrode for any deposits such as sticky metal dust.4. Check the operating temperature and whether there are any abnormalities in the surrounding environment.
Our Factory