High Pressure Composite Material Autoclave, Composite Material Autoclave, High Pressure Autoclave manufacturer / supplier in China, offering High Pressure Composite Material Autoclave, Tank Surface Blast Cleaning Machine/Vertical Movable Rust Remove Blasting Machine, Vertical Movable Shot Blasting Machine/Shot Blaster and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Set | US $10000.00/ Set |
Local Area: | Qingdao, Shandong, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, PayPal |
Warranty: | 2 Years |
---|---|
Control Type: | PLC |
Automatic Grade: | Automatic |
Air cooled pvc/pu conveyor belt vulcanizing press
Introduction to the HODO Splice Press
The HODO splice press is an all-in-one solution for splicing thermoplastic conveyor belts (e.g. PVC polyurethane).
No external control box, air pump, or water cooling tank are required.
The HODO presses are provided with electric heating and built in air cooling. The splice process runs fully automated.
•Splice pressure is applied by an internal compressor, max. 2 bar (28 psi)
•Heats up to a splice temperature of max. 200°C (392°F)
•Keeps it at the splice temperature (adjustable dwell time)
•Cools down to the cooling temperature (safe temperature to take the belt out)
•For thicker belts a preheat temperature and preheat dwell time can be applied
• The bottom heating can be set lower or higher than the top heating
• The splice surface is 130 mm ; the heated zone is 110 mm.
f the belt is relatively thick a problem might occur where the outside of the belt is at the splicing temperature too long, waiting for the inside to reach the required temperature. Molten material might flow away or discolor and fabrics might shrink. To avoid this problem from happening, the preheat option can be used. This option heats the belt up (outside and inside) to a temperature just below the melting temperature. After the preheat stage, the inside splice temperature can be reached much quicker, minimizing the risk for unwanted flow of material, discoloring or fabric shrinkage.
The reading of the display relates to the top temperature of the press. If more or less heat is required at the bottom of the belt, the "bottom heat factor" can be used. Please note that this factor relates to a plus or minus amount of heat (%), not to a specific temperature.
HODO presses are available in 5 different sizes:
• 300 mm effective (12")
• 600 mm effective (24")
• 900 mm effective (36")
• 1200 mm effective (48")
• 1500 mm effective (60")
HODO presses function on different voltages
Tool Specification and Parameter
Tool Specifications
HODO300
HODO600
HODO900
HODO1200
HODO1500
Effective length
305 mm / 12 "
610 mm / 24 "
914 mm / 36 "
1219mm/ 48"
1524mm/ 60"
Effective width
130 mm / 5.1 "
130 mm / 5.1 "
130 mm / 5.1 "
130mm/ 5.1"
130mm/ 5.1"
Weight lower part
10 kg / 22 lbs
15 kg / 33 lbs
20 kg / 44 lbs
28.5KG/56lbs
32KG/68lbs
Weight upper part
11 kg / 24 lbs
15 kg / 33 lbs
18 kg / 40 lbs
25.5KG/50lbs
30KG/65lbs
Total weight
21 kg / 46 lbs
30 kg / 66 lbs
38 kg / 84 lbs
54KG/106lbs
62KG/133lbs
Length
505 mm / 19.9 "
805 mm / 31.7 "
1105 mm / 43.5 "
1405mm/ 55.3"
1705mm/ 67.1"
Overall Height
220 mm / 8.5 "
220 mm / 8.5 "
220 mm / 8.5 "
225mm/ 9"
225mm/ 9"
Max. pressure
2 Bar / 28 PSI
2 Bar / 28 PSI
2 Bar / 28 PSI
2bar/28 PSI
2bar/28 PSI
Max. temperature
200 °C
200 °C
200 °C
200 °C
200 °C
Dimensions
for transport
(L x W x H)
770 x 370 x 310 mm
(30 x 15 x 12 ")
1070 x 370 x 310 mm
(42 x 15 x 12 ")
1370 x 370 x 310 mm
(54 x 15 x 12 ")
1926 x 370 x 400 mm
(68 x 15 x 12")
1926 x 370 x 400 mm
(76 x 146 x 122")
Weight
for transport
26 kg / 57 lbs
35 kg / 77 lbs
43 kg / 95 lbs
84KG/180lbs
96KG/210lbs
HODOpresses are supplied with a flight case for both storage purposes and also for easy transport to on-site jobs.Place press in the flight case so the end with the power receptacles is facing the storage compartment. This will protect the receptacles from damage when transporting.
Flight cases for the HODO 300-900 have two wheels. HODO 1200-1500 are packaged in flight cases with four wheels and an extension handle.
Flight cases can be stacked on top of each other, but need to be secured during transportation.
Standard size of air cooling presses are all in stock.
Our packing way :Export standard (wooden package ) or according to your requirement .
Our Services :
1. We will design,manufacture,install and test the machines according to customers' requirement .Relevant personnel training for customers,ensure that customers fully grasp the use and maintenance of technology.
2 .Our service department listen to customers' feedback at any time and provide spare parts timely.
Welcome to visit our factory and we can show you the machine in working condition:
If our products win your interest, please send us inquires and we will provide detailed information to you. We can also make machines according to your request.
Our packing way :Export standard (wooden package ) or according to your requirement .
Our Services :
1. We will design,manufacture,install and test the machines according to customers' requirement .Relevant personnel training for customers,ensure that customers fully grasp the use and maintenance of technology.
2 .Our service department listen to customers' feedback at any time and provide spare parts timely.