China Pneumatic Unloading Carrier for Two Piece Water Closet One Piece Toilet

Product Description

Pneumatic unloading carrier for green base is used to turn the green base of water closet, one piece toilet, and bidet and so on, can instead of old manual unloading device.

Detailed Photos

The machine mainly includes clamp device, turning device and pneumatic system.

Product Parameters

Pneumatic unloading carrier main technical dataPressure of air source: 0.5-0.7Mpa(5-7kgf/cm2)Cylinder of turning:Model: SI-160x250-CA Diameter of cylinder: φ160mm Stroke: 250mm Q'ty of cylinder: 1pcsClamp cylinder:Model: SDA-50x50-B Diameter of cylinder: φ50mm Stroke: 50mm Q'ty of cylinder: 1pcTurning agree:82° suitable forOne piece toilet and two piece toiletOverall size:L1070xW890xH510mmMachine weight:180kgWorking temperature:5-40ºCCylinder brand: SMC or AirTAC

With single pneumatic unloading carrier(include air guns), all of pneumatic elements like cylinder use SMC brand Turning capacity: 70kgs

Working principle

The clamping mechanism is composed of a case shell, a chuck, a clamping block and a clamping cylinder, the bottom is connected with the turning shaft by bolts. The force of the clamping cylinder drives the chuck to expand and contract through the clamping block to complete the clamping and loosening actions of the mold carrier;
The over-turning mechanism includes an over-turning shaft, an over-turning arm, a turning arm pin, a cylinder top arm and a swing cylinder. When performing an over-turning action, the cylinder rod of the swing cylinder extends or retracts, and the power is transmitted to the turning shaft through the turning arm pin and turning arm, which prompts the turning shaft to swing along the axis, thereby driving the clamping mechanism connected with the turning shaft to swing. Complete the flipping process;
The air control system includes a pressure reducing filter and an air control box. The decompression filter is used to adjust the pressure of the compressed air and filter out the impurities and moisture in the air to meet the requirements of use. Pneumatic logic components are arranged in the air control box. Five manual operation buttons are arranged on the outside of the air control box to control the clamping, loosing, turning up and turning back movements of the clamping mechanism and the turning mechanism. The middle one is the emergency stop button used for emergent stopping action when an accident occurs during the operation (for the use of the emergency stop button, please refer to "Use of Equipment").