Applications of Pusher Kiln: Suitable for the low loss rate once firing or twice firing process of cathode material of lithium batteries.
Features of Pusher Kiln: Use of advanced insulation materials, highly energy efficient, unique furnace chamber and atmospheric field design, uniform temperature control and stability. The oxygen content is more than 10ppm.
1. Max Temperature: 950deg. C, Temperature Range: RT~750deg. C,
2. Dimension of the Furnace Entrance(from push board surface to the furnace roof): 700x 230mm.
3. Pusher: Full automatic circle line hydraulic pusher (max working pressure: 7 Mpa).
4. Circular Line: Single board full roller table structure (clock wise direction).
5. Main Pushing Speed: 500mm~1500mm/min.
6. Typical Process Period: 20min.
7. Heating Element: Ceramic tube with high temperature resistant heating wire through inside.
8. Atmosphere: Nitrogen(99.999%).
9. Exhaust System: There is 3 groups of exhaust stacks on the heating up zone. (6 stacks), (please see no. 3.2 for details. ).
10. Cooling Mode: Air cooling combined with water cooling.
11. Temperature Control Stability: ± 1deg. C
12. Temperature Uniformity: ± 5 deg. C, (Flat High Temp Zone)
13. Zone Number: 11 zones
14. Temperature Control Point: 22 points
15. Alarm instructions: Over temp, thermocouple failure, over load, oil pressure, water temperature, oxygen content test and other audible and visual protection
16. Weight: about 6000Kg
17. Overall Dimension: 23750x 5400x 1920mm (Lx Wx H). (Exclude mounting feet, alarm lamp and control cabinet)
ModelPush Board Dimension (mm)TemperatureRangeAtmosphere12mHTD7523-1009ZCN340*340*30*2200-900Deg. C.Nitrogen16mHTD7523-1009ZCN20mHTD7523-1009ZCN24mHTD7523-1009ZCN28mHTD7523-1009ZCN