China QC Model Double Beam Magnet Overhead Crane Hoist

QC Model Double Beam Magnet Overhead Crane and Hoist
This crane is a special product equipped with electromagnetic chuck that used to lift iron or steel blocks, cylinders and so on. It consists of bridge, crane travelling mechanism, trolley, electric equipment and electromagnetic chuck. Both travelling mechanism and trolley motors are special motors for canes, large starting torque and loading capacity. Magnetic retentive is 10 minutes after power shut. The shape of electromagnet can be designed according to adsorptive goods.
Features: Lightly and ingeniously structured, easy for application, strong magnetic attraction power and safe in handling.
.
Notes:
1. Please lock the revolving part of hook with screw while using the electromagnet disk, and not permit revolving.
2. The lifting capacity includes the dead weight of electromagnet disk.
3. The electromagnet disk in the form is the referent type, and the pulling weight is the max pulling capacity of electromagnet disk, so the user can select differently according to practical situation.
4. User can select the configuration and property by themselves.
Control method:
Pendent line with press button or remote control or both.
Crane girder:
The crane girder is of welded girder construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and small wheel loads being transmitted to the crane runway!
Safety:
Overload protection,
Main lifting motor with thermal protection,
Hooks with latch,
Rubber buffers
Protective earthing,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assemly.
All crane must be preassmebled and tested before leaving factory and offer the certification of test.
Design and construction rules:
All the standards which is required for the crane is the Chinese standard.
Painting:
Primer and finishing paint
Color: According to your demand.
Average thickness: about 100 microns.
Provide us with accurate measurement requirements upon ordering and we can offer the design and manufacture of non-standard products of various hoisting capacities and for various spans according to your special requirements.
Welcome contacts us by E-mail or online, you will receive our prompt and careful reply!