RP Series Potentiometer (Position) Signal Isolated TransmitterFunction: Receive the sliding resistance signal of the site, convert it into 4-20mA, 0-5V and other standard signals linear with the resistance value, and output it to DCS or other secondary instruments. Contains a constant voltage source for the sensor. Features: DIN rail independent installation; input, output, power supply three ports high reliability isolation.2.Ordering information:
2.SPECIFICATION2.1 input
Input signal: Resistance signal, resistance range: 0-100KΩ
Excitation method: excitation voltage: 2.5V or 5V
2.2 output
Output load resistance: RL ≤ 500Ω (when the output is a current signal)
RL ≥ 1KΩ (when the output is a voltage signal)
2.3 Parameters
Basic accuracy: 0.1% F.S.
Power supply:DC24V, ±10%
Current consumption: ≤30mA (one input and one output, 24V power supply, 20mA output)
≤50mA (one input and two output, 24V power supply, 20mA output)
≤60mA (two in two out, 24V power supply, 20mA output)
Temperature drift: 0.005% F.S./°C (-20°C~+55°C)
Response time: ≤10mS (0-90%) (TYP)
Insulation strength: 1500V AC / 1min (between input, output and power)
Insulation resistance: ≥100MΩ (between input, output, and power)
2.4 Operating temperature range: -20 ~ +55 ° C
2.5 Electromagnetic compatibility: in line with GB/T 18268 (IEC61326-1)
2.6 Applicable field devices: Potentiometer.
4. Main model:
4.1 Type A shell models:
channels4-wire,P12-wire P21 in 1 outRPA11P1-XXRPA11P2-XX1 in 2 outRPA12P1-XX RPA12P2-XX 2 in 2 outRPA22P1-XXRPA22P2-XX
4.2 Type B shell models:
channels4-wire,P12-wire P21 in 1 outRPB11P1-XXRPB11P2-XX1 in 2 outRPB12P1-XX RPB12P2-XX 2 in 2 outRPB22P1-XXRPB22P2-XX
4.3 Type C shell models:
channels4-wire,P12-wire P21 in 1 outRPC11P1-XXRPC11P2-XX1 in 2 outRPC12P1-XX RPC12P2-XX 2 in 2 outRPC22P1-XXRPC22P2-XX
4.4 Type D shell models:
channels4-wire,P12-wire P21 in 1 outRPD11P1-XXRPD11P2-XX