China RV-300C HDT VICAT TESTER

It is used to determine Heating deflection and Vicat softening temperature of the plastic, rubber etc. thermoplastic , it is applied to produce and scientific research widely plastic, rubber and material.
This apparatus is in accordance with the requirement of ISO75, ISO306, GB1633, GB1634,and GB8802 standard.
Main technical parameter:
1. Temperature range: room temperature -300ºC
2. Heat up rate: 120ºC/h(12±1ºC/6min)50ºC/h(5±0.5ºC/6min)
3. Max. temperature error:±0.5ºC
4. Measurement range of deformation :0~10mm
5. Max deformation measurement error:±0.01mm
6. Numbers of specimen mounting: 4
7. Total weight of load pole, tray, indenter(indenter point) and measurement rod: 71 g
8. heating medium: methyl silicon oil or other medium regulated in standards(user provides for himself, note: the medium flash point must be 50ºC higher than the maximum test temperature ).
9. Heating power: 3kW.
10. Cooling mode: water(below 150ºC), wind cooling (above 150ºC) (user should prepare cooling equipment for himself );
11. power supply: 220V±10% 10A50Hz.
12. Displacement sensor: digital indicator.
13. May set upper limit temperature: when test temperature reach upper limit temperature, automatically stop controlling temperature and heating .
14. LED display may display upper limit temperature, hate up rate and real temperature and test result temperature.
15. Possess the function which automatic record heating deflection temperature ,vicat softening temperature and sound alarm.
16.With discharge of lampblack pollution and cooling function
17. Table type structure, sample frame manual raise and drop
Main configuration
1. Mainframe one
2. Sample framefour
3. Weight four
4. Prod with VICAT testingfour
5. Press head with Heat Deflection testingfour
6. Mainframe power connection line two
7. Provide English explanationone each