China Rebar Terminator in Comstruction End Disk

Introduction
JBCZ company was established in 1987 , Chinese first and largest manufacturer of rebar splice products , the only one factory who use CNC machine to produce rebar couplers in China.
Product Description
1,Wide working range: adaptable for diameter 12mm-40mm same diameter, different diameter,
bending, new and old, advance covered up rebar of GB 1499, BS 4449, ASTM A615 Grade 60 and grade 75 or ASTM A706 standard
2,High strength: stronger than the reinforcement bar and guarantees bar break under tensile stress(tensile strength of connection point =1.1 times of connected bar).It can satisfy the requirements stipulated in the Chinese standard JGJ107-2010 and meet ACI 318 TYPE 1 and ACI 318 TYPE 2.
3,High efficiency: upset forging and threading one rebar end only needs no more than one minute, and handy operation and quick link.
4,Environmental protection and economy profit: no environment pollution, can work all day, not affected by weather, economize energy source and bar material.
5.No reduction of the bar cross section area.
6.Allows full ductile elongation of bars.
7.Easy installation, no torque wrench required.
8.One standard coupler for all splicing requirements (Standard/Position).
9.Manufactured under strict quality assurance plan, ISO 9001 and ASME certified.
10.Full traceability of material origin and production batch.
11.Solves bar congestion problems.
12.No staggering of spliced bars required.
2. Application:
Easy connection by bar rotation until full thread engagement.
Parallel thread: No risk of thread mis-match. No risk of cross-threading.

3.Technical Data

Steel bar Diameter(MM)External Dia.(MM)Length (MM)Thread size (MM)122030M14*2142234M16*2162640M20*2.5182944M22*2.5203248M24*3223652M27*3254060M30*3.5284466M33*3.5325072M36*4.0365680M39*4.0406290M45*4.0

4. Upset forging parallel thread system (Including machine and coupler )

Upset forging parallel thread steel bar coupler can make sure 100% Bar Break Performance, it can connect steel bar diameter from 12mm to 40mm.

Description of construction material thread rebar couplers :

1. This type of construction building material threading rebar coupler is matching rebar thread processed by rib peeling thread rolling machine.

2. Reliable quality, the raw material origin and production batch can be traced.

3. Full implemention according to ISO9001:2000 quality management system.

4. Can link rebar with diameter from 16 mm to 40mm.

5. The tensile strength of splicing is equal to the rebar.

6. Easy operation and rapid connection.

7. Protective plastic cap for Mechanical rebar coupler and cover for threaded bar is available.

5. Accessories

Machine Parts

Name: Chaser

Brand:JBCZ

Original: China

Make thread on enlarged rebar.

used in GZL-45 threading machine
Process range: 12-40MM

Lifespan:promise to process HRB400 rebar 25MM for example,can process 2000pcs,will be more than 2000 pcs actually.

Machine Parts

Name: Mould

Brand:JBCZ

Original: China

Make rebar end enlarged.

Used in GD-150Forging machine

Process range: 12-40MM

Lifespan:promise to process HRB400 rebar 25MM for example,can process 2500pcs,will be more than 3000 pcs actually.

6. JBCZ company other rebar coupler products:
As China first and biggest manufacturer factory, we JBCZ also have other more REBAR splice machine and rebar coupler, such as:
6.1 Dextra type rebar coupler-Upset forging parallel threaded coupler
6.2 Rib Peeling roll stamping rebar coupler and rebar threading machine
6.3 Cold extrusion press threadless rebar coupler and rebar pressing machine
6.4 Taper threading machine and taper threaded coupler
7.Package
Couplers are packed by white cartons , machine are packed by wooden case.

1. Shorten your engineering period -- the two rebars can be connected within 35 seconds;

2. Catch the highest quality -- 100% broken rebars, no safety worrying, can past any safety quality test;

3. Save rebars -- give up weld and colligation rather than our connecting methods, can save many rebars materials.

4. JBCZ certifications-- satisfy DCL, ACI-318, KBR, ISO9001, BS8110, Slip Test, American Element Test and so on.

5. JBCZ is the first manufacturer of rebar splicing system in China, since 1987.

6. JBCZ is not only having Chinese Production Line, but also having CNC Production Line.

JBCZ entered into reinforcing bar connection since 1987 including R&D ,
manufacturing,at the same time we have more than400 job-site workers.
We used our own products in the construction site ,contracted projects and personally experienced the projects.
So we have professional experience in the field of site operation,connection speed,connection effect,connection quality,
Artificial application, material application as well as comprehensive cost.

9.Certificate&Client

Q1: Are you trading company or manufacturer ?

A: We are factory. We are the FIRST manufacturer of rebar coupler since 1987.

Q2: How long is your delivery time?

A: Generally it is within 3-7 days if we have raw material in storage, or within 12-15 days if there is no raw matieral in storage, it is according to detailed quantity.

Q3: Do you provide samples ? Is it free or extra ?

A: Yes, we could supply the sample for free charge , clients do not need to pay the cost of freight.

Q4: What is your terms of payment ?

A: Payment 100% in advance. Can communicate.

B:All the payment go through Aliababa onetouch or Alibaba assurance payment

Q5: How can I know the quality of JBCZ rebar coupler?

A: We can send you FREE SAMPLE to do test, or you can send us your rebar, we link it with our rebar coupler, then send back to you, if the test result fail, we will return the money back .

Q6: Where is your company?
A:Our company is located between Shanghai and Nanjing China, if you arrive at Shanghai Airport, we are glad to pick you up. It will take 2 to 3 hours from the Airport to our company by Car. You are very welcome to visit us!