China SGS Approved PAC Coagulant for Drinking&Potable Water Treatment

Product Description:
PAC-01 is used for drinking/potable water treatment and paper industry.
Polyaluminium Chloride is high-effective inorganic polymer coagulant. It is widely applied in water purification, drinking water treatment, paper production and daily chemicals.
PAC chemicals features:
1) Made from pure raw material
2) Used for drinking water treatment and paper mills as retention agent
3) Appearance: Solid powder, white
4) Al2O3: 29% (min. )
5) Basicity: 50.0% ~ 85.0%
6) Insolubles: 0.5% (max. )
7) pH: 3.5 ~ 5.0
8) sulphate: 3.5% (max. )
9) N: 0.09% (max. )
10) As: 0.0005% (max. )
11) Mn: 0.045% (max. )
12) Cr6+: 0.0015% (max. )
13) Hg: 0.00002% (max. )
14) Pb: 0.003% (max. )
15) CD: 0.0006% (max. )
16) Fe: 0.008% (max. )
Polyaluminium Chloride Advantages:
1, Low dosage than Aluminium sulfate, low cost;
2, Quick formation of big flocs and rapid precipitation.
3, Widely adaptablility and good solubility.
4, Slight corrosive and easy for operation.
5, Not block the pipes over long-time usuage.
6. Higher purity of raw material Al(OH)3 and HCl.
Polyaluminium Chloride Usuage:
1. For solid PAC, dilution is necessary before being dosed. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage).
2. The specific dosage is based on the flocculation test and on the trail. Normally, the dosage of solid is 1-15g/MT, the dosage of liquid product is 3-40g/MT
3. Its acidity is lower than other inorganic coagulants.
4. The PAC solution can not be place more than one week.
PAC Packing&Storage:
1.25kg/polypropylene woven bags with inner plastic bag.
2. Warranty for 2 years.
3. Keep in dry and ventilative place