China Silicone RTV Silicone Silicone Rubber

food grade liquid silicone rubber mold making silicones for chocolate candy cakeApplication of food grade liquid silicone rubber
It has 2main parts application:First: making many kinds of molds:*Making molds for:
Low melt metals (mold life can be short) RTV 2K Silikone
Cement, Concretesilicone rPre-Press Equipment ubber distributo RTV 2K Silikone rrs
making concrete stones
wax molds
PU molds
resin molds food grade silicone rubber
gypsum casting
candle molding
chocolate ,candy and any other FDA food product mold making
protoMining Machinery typing etc.*Making molds for food grade products: chocolate molds, cake molds, sugar molds,ect.
*Making molds for life casting: real hand molds, real feet molds, dildos molds, sex doll molds, ect.Second: make silicone products, like silicone insoles, silicone gel, ect.
andprosthetics arms,prosthetics hands,prosthetics foot,prosthetics legs, ect.
and silicone mask, skin, ect. sex dolls, sex toys, ect.

Advantagesof food grade Cutting & Fold-bend Machine liquid silicone rubber
Features ofmedical silicone buy/food grade liquid silicone rubber
High chemical resistance to the aggressive components of some types of resin
High resistance to laceration (this characteristic guarantees high resistance to wear and tear)
High level of accuracy in reproducing very small particulars
High dimensional stability over time and non-deformability
Considerable resistance to high temperatures and to ageing
Excellent non-stick effect
Soft, stretchy, high tear resistance,
Will not shrink in service
Highest quality
Technique Data Sheet of E-625food grade liIndustrial D Printer quid silicone rubber
Product
E-625
Appearance
Translucent
Hardness(shore A)
25±2
Mix ratio(A:B)
1:1
Viscocity(mPa.s)
12000±2000
Tensile strength (kgf/cm2)
50±5
Tear-strength (kN/m)
18±2
Elongation(%)
450±50
Pot life/working time (mins)
30-40
Curing time/setting time (hrs)
3-4hrs(25°C)
110-20mins(60&Electronic Instrument deg;C)
Shrinkage rate (%)
≤0.1
(Note: the hardness ,color, curing time and operation time is adjustable)Operation instruction of HY-E Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1 and stir part Aand part Bevenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes .(If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush alayer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .Notice: As our E-series silicone is platinum cure silicone ,which is very easy to cause
cure inhibition ,so pls do remember thoroughly clean the model and tool before
operation .Besides ,pls avoid the liquid E-series silicone contact or mix with the
following material ,otherwise the silicone won't be cured :
1. Liquid condensation silicone (condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
SHELF LIFE:8-10 months when stored under 24°C in original unopened packages.
PACKAGE: Packed in 20kg/pail+20kg/pail, 200kg/pail+200kg/pail.

Thank you very much for paying attention to our products.:)

We have adedicated customer service team to answer any queries you may have.

Please feel free to contact us 24/7 hours. We will manage to help to resolve any issue.

Contact Person:Monica

Free Sample is Available .

If you have any more question about liquid silicone rubber ,please feel free to contactMonicaas below:

For more information, plscontact with Ms monica at any time

Tel:+86 -0755-89212386

Mob :+8618948315814

Website:www.szrl.net