China Spindle Servo Drive AC Digital Spindle Servo Drive Servo Drive

HSV-180AS SERIES OVERVIEWHSV-180AS digital AC spindle servo drive is a high-voltage feed drive based on HSV-18S. The drive unit uses AC 380V power input, and features compact architecture, easy operation, and high reliability.
HSV-180AS digital AC spindle servo drive unit uses the latest technology such as digital signal processor (DSP) for motion control and intelligent power module (IPM) to achieve a closed-loop servo control of position, speed, and torque for permanent magnet AC synchronous servo motors. HSV-180AD digital AC spindle servo drive unit provides protection functions for short circuit, overcurrent, overvoltage, undervoltage, overload, overheat, and pump. It integrates communication interface, pulse input interface, analog input interface, and small keypad debugging digital display.
FEATURES

1. High Performance AC digital Spindle servo drive

2. Easy and flexible control (five control modes)

3. Full state display

4. Various interface and control modes

5. Applicable to situations that requires high speed and high power

6. Double encoder interfaces that can be connected to position feedback components such as grating ruler to form full-closed loop position control system

DIMENSION

The following figures show the installation dimensions of HSV-180AS series servo drives.
1.Figure 3-2 Dimension and size of HSV-180AS-, 035, 050, 075 (without auxiliary devices Unit: mm)
Figure 3-3 Dimension and size of HSV-180AS 035, 050, 075 (with auxiliary devices Unit: mm)2,Figure 3-4 Dimension and size of HSV-180AS-,100, 150 (without auxiliary devices Unit: mm)
Figure 3-5 Dimension and size of HSV-180AS-100,150 (with auxiliary devices Unit: mm)
3,Figure 3-6 Dimension and size of HSV-180AS-,200, 300,450 (without auxiliary devices Unit: mm)Figure 3-7 Dimension and size of HSV-180AS-,200, 300,450 (with auxiliary devices Unit: mm)PARAMETERS
Description

TypeHSV-180AS-035HSV-180AS-050HSV-180AS-075Maximum power of applicable Motor(KW)3.7KW5.5KW5.5KW7.5KW7.5KW11KWRated output current (A)16.821.931.4Short-time Peak Current (A)222842Circute breaker(A)253232404063conector(A)182525323240Input exchange reactorCurrent (A)101515202030Inductance (mH)1.40.930.930.70.70.47Input filter(A)101515202030Maximum braking resistor (A)25 2540Recommended
Braking
resistor Resistor (Ω)51Ω51Ω27ΩPower (W)1500W1500W2000WQuanlity111Recomand value of main circute cable (mm2)4444410TypeHSV-180AS-100HSV-180AS-150Maximum power of applicable Motor(KW)11KW15KW18.5KW22KWRated output current (A)43.862.8Short-time Peak Current (A)5684Circute breaker(A)6363100100conector(A)40506380Input exchange reactorCurrent (A)30405060Inductance (mH)0.470.350.280.24Input filter(A)405065Maximum braking resistor (A)75Recommended
Braking
resistor Resistor (Ω)33Ω27ΩPower (W)1500W2000WQuanlity22Recomand value of main circute cable (mm2)10161625TypeHSV-180AS-200HSV-180AS-300HSV-180AS-450Maximum power of applicable Motor(KW)30KW37KW51KW75KWRated output current (A)85.7125170Short-time Peak Current (A)110168224Circute breaker(A)125160200400conector(A)95115150250Input exchange reactorCurrent (A)8090150250Inductance (mH)0.170.160.0950.056Input filter(A)100150250Maximum braking resistor (A)100150Recommended
Braking
resistor Resistor (Ω)30Ω30Ω30ΩPower (W)2500W2500W2500WQuanlity346Recomand value of main circute cable (mm2)70120SpecificationInput powerRated voltage,
Rangeof voltage fluctuation
Frequency150A and below specifications:Three-phase AC380V -15%~+10% 50/60Hz
200A and above Specifications:
1.Single phase AC220V control power -15%~+10% 50/60Hz
2.Three-phase AC380V strong power -15%~+10% 50/60HzControl modesPosition control,External speed control,JOG control,Internal speed controlCharacteristicSpeed frequency response300Hz or higherSpeed volatilityLower than 5r/min (load 0%~100%)Speed range1r/min~12000r/minConstant power range1:4Position controlTypes of pulse commandDirection + pulse train CCW pulse +CW pulse Two-phase A / B quadrature pulseForm of pulse commandNon-insulated wire drive(about +5V)Frequency of pulse
command≤500kHzSpeed
controlTypes of pulse commandDirection + pulse train CCW pulse +CW pulse Two-phase A / B quadrature pulseForm of pulse commandNon-insulated wire drive(about +5V)Frequency of pulse
cHome Hardware ommand≤500kHzAnalog commandDC 0~+10VorDC -10V~+10VAcceleration and deceleration function0.1~180secondsType of spindle motor encoderTTL composite incremental photoelectric encoder:1024line,Electric Contact & Materials 2048line,2500line
Sine and cosine incremental encoder:256line
Absolute encoder:ENDAT2.1/2.2 Protocol encoder(EQN1325/EQN1313)Spindle encoder Electrode encoder typeOptical encoder (TTL)
Sine and cosine analog signal(1Vpp)Input and output
SignalControl inputRun enable
Alarm clear
Forward and reverse running enable
Spindle orienPost-Press Equipment tation ready
Control modes switch
Indexing incremental orientation ratio input selectionControl outputSpindle ready
Spindle alarm
Spindle orientation-finished
Speed-reached
Zero-speed reachedSpindle functionSpindle orientationAccuracyPrinting Machinery :±1pulse;Position adjustment:Parameter settingRigid tappingTapping deviation:±2%Other functionC-axis control,Thread cuttingCommunication functionRS232 use MODBUS protocolMonitoring functionSpeed
Flux current
Torque current
Motor load current
Switch-value input status display
Switch-value output status display
Control mode displayProtecting functionProvides protection against:
Over speed
Main power over-voltage and under-voltage
Over current
Overload
Motor over heat
Big speed error
IPM fault etc.OperationSix LED digital tubes, two light-emitting diodes(LED), five bottoms
Adaptive motor2.2KW~75KWAC servo spindle motorUse Environment Use placeNon-corrosive, flammable gas, prevent conductive objects, metal dust, oil mist and liquid from entering inside the drive unit.Use Temperature Storage TemperatureUse temperature :0ºC~+40ºC,More than 40 ºC shall be derated.
Storage temperature :-20ºC~+60ºC.Use humidity Storage humidityBelow 90% RH, non-condensing.AltitudeBelow 1000m,Altitude above 1000m shall be derated.Vibration / impact resistanceVibration Resistance 4.9m/S2 ,Impact resistance 19.6m/S2
about US HNC Electric is an automation & drive focused global company, providing global customers with control, display, drive and system solutions & other related products and services, under the support of its excellent electrical and electronic technology as well as strong control technical force.HNC Electric listen and understand our clients requirement, by improving and upgrading our product functions and performance continuously , we provide and develop perfect products and solutions according to different requirement of the industry. Ourproducts have been used and applied successfully in packing, printing, textiles, plastic injection, elevator, machine tool, robot,wood cutting, stone carving, ceramic, glass, paper making industry, crane, fan & pump, new energy resources etc.In order to provide more complete service and product for our customers internationally, meeting our customers expectations in the respect of time of delivery, solution support, after sales services and product customization support, HNC Electric has been searching for capable companies as our business partners, product agents and distributors, bringing good product quality and professional service to our clients globally. Up until now, we have already got customers and business partnerships built up in over 40 countries, which include Europe, North America, South America, Asian-pacific region, Middle East and Australia etc.The superior quality and low cost of HNC Electric's product are benefited from the mature and complete manufacturing system and the efficient logistic of China. Our talented and sufficient manpower, our rich engineering experiences, drives our product to be more complete and better in the respect of functions and performances.HNC Electric, your professional electrical partner !
CERTIFICATES