China Talc Powder Industrial Ceramic Protection Fluidized Bed Jet Mill

Talc Powder Industrial Ceramic Protection Fluidized Bed Jet Mill
Working Principle
Fluidized bed jet mill works with cyclone separator, dust collector and suction fan to form a complete classifying system. Compressed air flow after filtration and drying would go into milling chamber from nozzles, and meet in the center area, where material would be impacted and ground and sheared. Milled powder would go up to the classifying chamber by the air flow from suction fan. The high-speed rotation of classifier wheel would create a strong centrifugal force to separate coarse powder and fine powder. Qualified fine powder would go through the wheel vane then into the cyclone separator or dust collector, while mixture of coarse powder and fine powder would fall down to the milling chamber to be milled again.
Performance Features
1. air jet mill suitable for various dry powder milling of Moh's hardness < 9, especially good for these materials with high hardness, high purity and high added value.
2. Product size can vary from d97: 2micon to 150micron. Good particle shape, and narrow particle size distribution.
3. Jet mill low temperature milling with no grinding media, especially good for these materials with heat sensitiveness and low melting point, high sugar content and highly volatile.
4. Powder milling is done by particles impacting each other, different from impact mill which impacts materials by blades or hammers and wear quickly. Good product purity.
5. It can be connected with several units of classifiers in series to produce several different sizes at one time.
6. It is easy to dismantle and clean. Inner wall smooth, and no dead angle.
7. Micronizer jet mill Close milling system, few dust emission, low noise, clean in production.
8. Control system uses program control, which operate easily and simply.
More about Talc
Talc ore (magnesium hydrogen silicate), with a chemical composition of [Mg3(OH)2(Si2O5)2], is a phyllosilicate with a mold hardness of 1.
Talc has many applications, such as: pulp, paint, dyes, rubber, plastics and ceramic industry fillers, talc can even be used in the pharmaceutical industry. For example, it is used as a release agent for basic powders or pharmaceutical tableting. The high temperature resistance of talc makes it an important component in refractory materials, such as ceramics. In addition, talc can also be used as an electrical insulating material, a release agent in food technology, and a carrier for dyes.
Applications
Widely used in chemical industry, mineral industry, metallurgy industry, abrasive material industry, ceramics industry, fire-resistance industry, pharmacy industry, pesticide industry, food industry, health care industry and new material industries.

Parameter/
Model
MQW
03
MQW
06
MQW
10
MQW
20
MQW
40
MQW
60
MQW
120
MQW
160
MQW
240
Feed Size
mm
<3
<3
<3
<3
<3
<3
<3
<3
<3
Product Size
d97:um
2~45
2~45
2~45
5~45
5~45
5~45
5~45
5~45
5~45
Capacity
kg/h
2~
30
30~
200
50~
500
100~
1000
200~
2500
500~
3500
800~
7500
1000~
10000
1500~
15000
Air Consumption
m 3 /min
3
6
10
20
40
60
120
160
240
Air Pressure
Mpa
0.7~
0.85
0.7~
0.85
0.7~
0.85
0.7~
0.85
0.7~
0.85
0.7~
0.85
0.7~
0.85
0.7~
0.85
0.7~
0.85
Installation Power
kw
21.8
42.5
85
147
282
415
800
1100
1600

Note: The production capacity is closely related to the particle size, specific gravity, hardness, moisture and other indicators of the raw materials. The above is only for selection reference.

Who Choose ALPA

Common choice of many well-known companies

By 2018, 37 world top 500 companies, 89 Chinese top 500 companies, 169 national key laboratories and

engineering technology research centers have selected ALPA.

More than 3,000 customers have chosen us

Q: What service do you supply?

A: 1). We offer consultancy for project feasibility assessment, process flow definition, preliminary layout and factory building plan, project budget, project time schedule, etc.

2). We supply sample processing tests in our test station where are equipped with our various machine products, to help clients compare performances of different types of machines or process.
3). We supply project engineering, automation engineering and civil engineering.
4). We send engineers to the clients' project site and offer on-site technical instruction and supervision during the machine installation, commissioning and test run.
Q:How can I trust on your quality?
A: 1). All of the machine be tested successfully in Weifang workshop before shipment.
2). We supply one year warranty for all equipment and lifelong after-sales service.
3). We can test your material in our equipment before place the order, to ensure our equipment is suitable for your project.
4). Our engineers will go to your factory to install and debug the equipment, they will not be back until these equipment can produce qualified products.
Q:Does your company provide Engineers Abroad Service?
A: Sure, we provide it. And we can provide free training for on-site workers.
Q:How to train our staff about operation and maintenance?
A: We will provide detailed technical instructive pictures to teach them for the operation and maintenance. In addition, our engineers for guide assembly will teach your staff on site.