PHPA Emulsion, Emulsion, PHPA manufacturer / supplier in China, offering PHPA Emulsion for Drilling Flocculants, China Best Seller Water Decolor Agent for Textile Effluent Treatment, Sludge Dewatering Cationic Polyacrylamide and so on.
Min. Order / Reference FOB Price | |
---|---|
1 Tons | US $800.00/ Tons |
Local Area: | Jian, Jiangxi, China |
---|---|
R&D Capacity: | OEM, ODM, Other |
Payment Terms: | LC, T/T, D/P |
CAS No.: | 55295-98-2 |
---|---|
Acid-Base Property: | Acidic Surface Disposal Agent |
Certification: | ISO 9001 |
Appearance:Colorless and Translucid LiquidSolid Content: 50%minimunSpecific Gravity at 20°C:1.1-1.3PH Value (30% Solution):3-6Viscosity(25°C):50-300cpsSolubility:Completely Soluble With Water at Any RatePackage:30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drumStorage Temperature:Room temperature(10-35ºC)
Product Name:BWD-01 Water Decoloring AgentComponent:Dicyandiamide-formaldehyde ResinSolid Content:50%minCAS No.:55295-98-2Brand:BluwatOther Name:Color Removal Chemical;
Decolorant;
Decolorization Chemical;
Dicyandiamide-formaldehyde Resin FlocculantApplication:Waste Water Color TreatmentDecolorization:50~99%Sample:Free to TestCertificates:ISO, SGS
1Strong decolorization ( 80%~99%) and removal of COD ( 50%~80%)2In textile effluent treatment, compare to the ferrous sulphate and lime, low dosage and sludge.3Faster sedimentation, better flocculation in treating.4Non-toxic, environmentally friendlly, non corrosive of suggested dosage, economical.5Can eliminate the use of alum & further ferric salts when used as primary coagulants.
A. When have biological treatment first and after they make chemical treatment.B. When the treat first by chemicals, then the usual dosages are:1.Test and adjustment the pH of the effluent to 8-92.First we apply the PAC (contact time 3-5 min with the waste water), after then BWD-01 Water Decoloring Agent (contact time 5-10 min), and after then anionic polyacrylamide.3.It will give too much economy if we'll adjust the pH 8-9, otherwise the consumption of BWD-01 will be ~20% higher.Dosage:50-80 ppm BWD-01(raw)80-100 ppm BWD-01(raw)15-20ppm Polyaluminum Chloride(solid)15 -30 ppm PAC(solid)1 - 2 ppm Anionic polyacrylamide(solid)1 - 2 ppm Anionic polyacrylamide(solid)