China Thermal Dynamics Victor Plasma Source UC400xt

Ultra-Cut400 XT

Ultra-Cut 400XTMILD STEEL Production Pierce 2" (50 mm) Maximum Pierce 2" (50 mm) Edge Start 3-1/2" (90 mm)
Our next generation of high precision plasma cutters works the way you do - intelligently. Ultra-Cut XT systems give you the flexibility to increase cutting power and the assurance of superior quality, higher productivity and lower cutting costs. Ultra-Cut XT systems are available in 100-400 Amp outputs for production cutting plate up to 2" (50 mm) thick. With the ability to grow with your business, you can expand from one system to the next higher in minutes. With the Ultra-Cut XT systems, you'll always have the right amount of power today - and tomorrow.

Superior Cut Quality Means Greater Efficiency
The Ultra-Cut XT systems' superior cut quality means that parts can go directly from the cutting table to welding, painting or assembly without expensive secondary operations. Ultra-Cut XT high precision plasma systems cut with:
? Excellent dross-free cuts using oxygen (O2) plasma on mild steel.
? Unmatched cut quality on non-ferrous metals using unique Water Mist Secondary (WMS®) process.
? ISO 9013:2002 (E). Class 3 (depending on cut thickness angles below 3 deg) or better cut angles for true High Precision cuts.
? Minimal heat affected zone (HAZ) to improve welding quality.
? 3DPro technology sets the new standard in robotic cutting thin gauge material.


Higher Productivity Delivers Greater Profits
Ultra-Cut XT high precision systems deliver superior cut quality, at superior cutting speeds.
? Outstanding parts life to reduce down time and lower the overall cost of ownership.
? Highest kW output for maximized duty cycle and cut speed.
? Reduced downtime during parts changes with the Speedlok cartridge design.
? Lower current draw to reduce cutting cost.
? Shorter switching time between marking and cutting process for higher daily throughput.
? Highest cut speed in its class on stainless steel - up to 3 times faster than similar cutting systems.


Now More Energy Efficient
Compared to previous systems, Ultra-Cut XT systems draw about 20% less current and have an average electrical efficiency of more than 92%. They meet European Union Level V Efficiency Standards, and they will help companies everywhere lower utility bills.

Intelligent Solutions Set Us Apart
From superior technology for cutting heavy metal to better plasma marking, Victor® Thermal Dynamics® offers intelligent high precision solutions for automated plasma cutting applications. The XT Series provides access for these powerful cutting resources.

HeavyCut™ Technology
When cutting parts thicker than 3/4" (20 mm), rely on HeavyCut Technology to provide the best cut quality, precision and parts life with XTremeLife™ Consumables. HeavyCut 300A and 400A electrode with multiple Hafnium inserts increases parts life at high current applications.

"Bolt Ready" Holes with Diameter PRO™
Diameter PRO produces the industry's most precise holes optimized for a diameter-to-thickness ratio of 1:1 or greater.
It is the ideal process for a precision hole or radius with minimal-to-no taper on mild steel from 10 gauge (3 mm) to 2" (50 mm), or 1" (25 mm) on aluminum.

Water Mist Secondary (WMS) optimizes non-ferrous metal cutting
? Excellent non-ferrous metal cut quality using N2 as plasma gas and ordinary tap water as the secondary.
? Lowest operating cost.
? Dross-free cutting from gauge .394" (1.0 mm) to 1 1/2" (40 mm).
? Oxide-free cut face surface.
? Wide parameter window.
? Higher cut speeds compared to H35 cutting.



With the flexibility to grow with your business, you can start with an Ultra-Cut 100 XT, and when you are ready, expand to a 200, 300 or 400 Amp system. With the Ultra-Cut XT, you never have to worry about choosing the right system.


Added Flexibility - Expand As Your Cutting Needs Grow
Victor Thermal Dynamics designed the Ultra-Cut®XT with the flexibility to grow with your business. It features modular "inverter blocks" and a common cabinet for all amperages. To expand a 100A system into a 200A, 300A or 400A system, simply install additional blocks*. A field technician can install a new inverter block in less than 30 minutes.
The Victor Thermal Dynamics intelligent approach means never "under-buying" again. With Ultra-Cut XT systems, you'll always have the right amount of power today - and tomorrow.
* When expanding by 200 or more amps, simply connect the required additional external cooler to the system, switch to the correct consumables and you're ready to cut.

Easy-to-Service
The Ultra-Cut XT high precision system's modular design is not only easier to upgrade, but also easier to maintain.
? The Amperage/Error display indicates the status of the XT system to accelerate trouble shooting.
? Common components in the XT system minimize inventory.

Better Flow Control and Plasma Marking with the DFC-3000 Automatic Gas Control
Good gas flow control enhances cut quality and extends consumables life. Digital flow control with the DFC-3000 - when paired with the iCNC® XT controller - provides a better level of quality control. Together, they instantly set and control gas pressure, leading to faster cycle times and more productive cutting.
And for plasma marking with argon, the DFC-3000 and Ultra-Cut XT minimizes the purge cycle between marking and cutting, as well as the changeover time associated with manual controls. Change seamlessly between cutting and marking to:
? Indicate part numbers ? Drill or hole points ? Weld locations ? Lot numbers ? Bend or cut lines




Reliability - Performance You Can Rely On
Victor Thermal Dynamics rigorously tests its plasma cutters to ensure flawless performance. Should your Ultra-Cut XT need service, our modular approach minimizes parts inventory and repair time. Even when one inverter block malfunctions, cutting is still possiblewith the remaining blocks.
THE NEXT GENERATION OF HIGH PRECISION PLASMA CUTTING

The Ultra-Cut XT is the latest addition to Victor Thermal Dynamics integrated automated plasma system solution. The next generation Ultra-Cut XT combines high precision cutting with exceptional cost-performance benefits to deliver a more profitable plasma cutting operation.






Rated Output (Amps)400 A
Output Range (Amps)5-400 A
Output (Volts)200 V
Input Volts (Volts, Phase, Hertz) 380 V, 3 ph, 50-60 Hz,400 V, 3 ph,
50-60 Hz, 480 V, 3 ph, 50-60 Hz
Input Amps (Amps, Volts) 144 A @ 380 V137 A @ 400 V114 A @ 480 V
Duty Cycle (@ 104ºF / 40º C)100% (80 kW)
Max OCV 425 V
Plasma Gas Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar)
and Ar for marking with DFC 3000
Shield GasAir, N2,O2, Ar-H2 @ 120 psi (8.3bar),
H20 @ 10 GPH (0.6 l/min)
Power Supply Weight 555 lbs (252 kg)
Dimensions48.0" x 27.5" x 40.6" (1219 mm x 698 mm x 1031 mm)
CertificationsCSA, CE, CCC



XT™ Torch Technology -

The New Standard for High Precision Plasma Cutting Systems



No Tools Required
Unlike other torches, no tools are required to change either the torch consumables or major components in the torch head.
Leakless' Torch Head Design
Coolant doesn't drip form the torch head when the consumables cartridge is removed form the torch head.
The design prevents air from entering the system and becoming trapped in the leads.
Self-Centering Components
Consumable parts and torch body are precisely engineered to lock into place for absolute alignment and remain positioned cut after cut. Independently-aligned tip and electrode assures accurate re-centering of the consumable cartridge after each parts change. This guarantees best cut quality time and again.
Superior Warranty
Victor Thermal Dynamics' XT-Torch warranty covers components and service for a full 1-year period.
Precision Cuts on All metals
The XT-Torch dual gas technology provides one of the highest arc density plasma stream in the industry for precision cuts on mild steel, stainless steel, aluminum and other non-ferrous materials, and Ar for marking with the DFC 3000. Choices for plasma gas include - Air, N2, O2, Ar-H2 and Ar for marking with the DFC 3000. Shield gas choices include - Air, N2, O2, or Ar-H2 and H2O.
Relaxed Cutting Parameters
With the XT-Torch the operating window permits wide travel speed variance, which means you'll get great cuts more often with less wasted material and time.
? Less critical standoff height
? Wider 'Operating Window' for dross-free cutting

Material Thickness
(in) Speed
(IPM) Amps Plasma/Shield Thickness
(mm) Speed
(mm/min.) Mild Steel 10 ga. 30 30 O2/O2 3 910 1/4 120 70 O2/Air 6 3100 1/4 150 100 O2/Air 6 4030 3/8 9510 2300 1 48 200 O2/Air 25 1250 1 1/4 3035 750 3/4 100 300 O2/Air 20 2540 1 7025 1780 1 1/4 5035 900 1 80 400 O2/Air 25 2100 1 1/2 4540 1330 2 3050 790 Stainless Steel 16 ga. 110 30 N2/H20 1.5 3100 14 ga. 170 50 N2/H20 2 4310 3/16 705 1523 1/4 50 70 N2/H20 6 1495 1/4 72 100 H35/N2 6 1880 3/8 5510 1350 1/4 70 100 N2/H20 6 1810 3/4 50 200 N2/H20 20 1100 1 3525 900 1 40 300 N2/H20 25 1030 1 1/4 3035 760 1 35 300 H35/N2 25 920 1 1/2 3040 760 3/4 90 400 N2/H20 20 2286 1 1/2 3040 760 1 45 400 H35/N2 25 1170 2 1750 440 4 3.5 400 H35/H35 100 90 Aluminum 11 ga. 60 50 Air/Air 3 1520 1/4 100 N2/H20 6 2760 3/8 70 100 10 1700 3/4 90 N2/H20 20 2200 1 5025 1300 1 60 300 N2/H20 25 1560 1 1/4 4032 1000 1 85 H35/N2 25 2190 3/4 90 400 N2/H20 20 2200 1 1/2 5540 1350 1 90 400 H35/N2 25 2330 2 3050 810