China Tsm2 Moulded Case Circuit Breaker

Application
TSM2 series of moulded case circuit breaker is a new type product developed and manufactured by adopting international advanced technology. It is supplied with rated insulation voltage 800V and used for circuit of AC 50Hz, rated operating voltage AC 400V or below rated operating current up to 1600A for infrequent changing over and starting of the motors. Equipped with the protection devices for over-current, short circuit and under voltage, the product is capable of preventing damage of circuits and supply units. The products comply with IEC60947-2.
Specification

TypeRated Current(A)Number of
PolesRated Insulating
Voltage(V)Arcing
Distance
(mm)Ultimate Short Circuit
Breaking Capacity(KA)Service Short Circuit
Breaking Capacity(KA)Operation
PerformanceONOFFTSM2-63L6,10,16,20,25,
32,40,50,633,4500V0251815008500TSM2-63M03522TSM2-100L10,16,20,25,32,
40,50,63,80,100800V0(<=50)3522TSM2-100M0(<=50)5035TSM2-100H0(<=50)855010007000TSM2-225L100,125,160,
180,200,225<=503522TSM2-225M<=505035TSM2-225H<=50855010004000TSM2-400L225,250, 315,
350, 400<=505035TSM2-400M<=1006542TSM2-630L400,630<=1005035TSM2-630H<=10010065TSM2-800M630,700,8003<=1007550TSM2-800H<=10010065TSM2-1250M1000,1250,<=10010065TSM2-1250H<=10012575TSM2-1600M1600<=10012580

Note: 6A without thermal protection;
The N-pole of four-poles breaker is sited at the right side of the products has four types:
Type A: Without current trip-release on N pole which making all the time, not closing and opening with the other three poles.
Type B: Without current trip-release on N pole which closing and opening with the other poles.
Type C: With current trip-release whch closing and opening with the other three poles.
Type D: With current trip-release which making all the time not closing and opening with the other three poles.
Manua Operation Device
The mechanism is used in moulded case circuit breaker to operate the draw-out panel. Power distribution panel and supply box outside the panel by turning the handle ,and to ensure the door of panel would not be opened when the breaker is in "ON" position. The manual operation mechanism can be equipped with two types of handles, "A" model is square handle and "B" model is round handle.
Motor-driven Operation Device
Wiring diagram of type CDM electromagnetic operation device for TSM2-63,100,225
Code description: SB1,SB2 stand for push button.
(provided by users themselves)
Number "1" "2" "3" stand
for number of wiring terminals.
Rated Voltage : AC 220V, 400V.
Wiring diagram of type CD motor-driven operation device for TSM2-400,630,800
Code description: SB1,SB2 stand for push button.
(provided by users themselves)
"X" stands for line connection
terminals.
Rated Voltage: AC 220V, 400V.
Electromechanical Operation Device for TSM2- 63,100,225
Motor-driven Operation Device for TSM2- 400,630,800
Plug-in Connection Plate
Rare Panel Connection
Mechanical Interlock
Under Voltage Release
Shunt Release
Alarm Contact
Auxiliary Contact
Manual Operation Device