LC series turbine Pump for Fire Fighting are newly researched and developed on the basis of absorbing the advanced technology of domestic and foreign similar products. They are provided for delivering clear water, rainwater, sewage and seawater, etc. This series vertical turbine pumps specially designed according to UL448/NFPA20 standards. It could applied to varied kind of fire fighting projects.
Performance range
Capacity Q: 500~5000GPM
Head H: 15~120m
Outlet Dia.(mm): 150mm-1800mm
Construction of Turbine Pump for Fire Fighting:
LC series Turbine Pump for Fire Fighting are single stage or double stage vertical centrifugal partial submerged pumps. They are vertically installed with the inlet vertical downward and the outlet horizontal extending. The rotor elements can be designed pull-out or non-pull-out, the axial thrust of pump carried by the motor or carried by the pump according to requirements of customers. The bearings of the pump is rubber bearings or Thordon bearings, when the rubber bearings are used, the shaft has shaft sleeves with pressure clear water in for lubrication.
Materials of main parts of Turbine Pump for Fire Fighting:
Impeller: Stainless steel or bronze
Shaft: High quantity stainless steel
Others: Cast steel or Stainless steel
Instruction of Turbine Pump for Fire Fighting model
For example: 300LC-25
300: Pump outlet diameter (mm).
L:vertical mixed flow pump.
C: Centrifugal pump.
25: Head at design point.
Features
LC series Vertical Turbine Pump for Fire Fighting can be designed as single or multi-stage to meet the user's a wider range requirement of flow and head. The pump outlet can be designed on the top of or below the base layer.
Reduce the user cost
Using advanced hydraulic model, the pump is with high efficiency and stable performance. Vertical construction could saves the space of the pump station room, which could also save the cost to build the pump station.
Main standard during the pump design, production and testing.
GB6245-1998
GB/T3214-91
GB/T3216-2005
JB/T443-92
JB/T3564-92
JB/T3565-92
JB/T3565-92
performance requirement and test measure of fire fighting pump
test measure of capacity for water pump
rotor dynamic pumps-hydraulic performance acceptance tests-grades 1 and 2
technical conditions for centrifugal long shaft pump
types and basic parameters of deep well long shaft pump
centrifugal pump efficiency
centrifugal pump efficiency