China UPS Automatic Door Back-up Power

Name of Components
▪Storage battery
▪U-type bracket
▪Set screw
▪Mounting bracketx2
▪Stainless steel basket
▪Battery terminal
▪Main controller
▪220V input end
▪Function-set switch
▪Battery input terminal block
▪Reset button
▪Fire-fighting contact output
▪24V voltage output
▪Electric supply indicator light
Overall Characteristics
1.Specially designed for automatic door back-up power. The power can help automatic door work normally oncepower off.( open-close about 200 times, 10 hours continuously ). or keep door open automatically base on fireevacuation requirements.
2.Battery charge-discharge management by micro-computer. Have setting of quick charge, trickle charge and cut off the power automaticallly in low tension. The life time of battery is long.
Installation and Adjustment
Note: Please put the battery into track in 30° incline.
Step1: Put the battery pack into guide rail, shipping to suitable position and fix by special screws.
Step2: Adjust the position of battery.
Note: Loosen the screw before adjustment.
Step3: The connection between battery and main controller.
Picture of UPS Automatic Door Back-up Power
Note
1.Two kinds of wire of AC input: Live line and Zero line.
2.Please connect two storage batteries in series to get DC24V.
3.Please charge storage batteries up to 12 hours before first using.
4.Maintenance should be undertaked by professional maintainer.
5.System will automatically be cut when the storage batteries low to certain voltage rated value.
Parameter
Input voltage: AC220V, 50Hz
Output voltage: DC24V, 2.6AH
Working mode: Automatic working or keep opening
Indicator and protect: Charging proceeding shown by LED low voltage will automatically cut.
Charging time: Around16 hours
Open times: about 200 times
Controller Dimentions: 176(L)x53(W)x37(H)mm
Storage battery size: 70(L)x46(W)x99(H)mm(x2pcs)
Accessories List & Optional PartsOther Automatic Doors Accessories
1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.