China Vertical Turbine Pump for Water Intaking

Vertical Turbine Pump for Water Intaking

LC series Vertical Turbine Pump for water intaking are newly researched and developed on the basis of absorbing the advanced technology of domestic and foreign similar products. They are provided for delivering clear water, rainwater, sewage and seawater, etc. It is widely applied to water circulation projects in power station, industrial water intaking and disposal, mining water discharge, raw water sumping, etc
Performance range
Capacity Q: 500~5000m3/h
Head H: 15~120m
Outlet Dia.(mm): 150mm-1800mm
Construction of Vertical Turbine Pump for water intaking:
LC series Vertical Turbine Pump for water intakings are single stage or double stage vertical centrifugal partial submerged pumps. They are vertically installed with the inlet vertical downward and the outlet horizontal extending. The rotor elements can be designed pull-out or non-pull-out, the axial thrust of pump carried by the motor or carried by the pump according to requirements of customers. The bearings of the pump is rubber bearings or Thordon bearings, when the rubber bearings are used, the shaft has shaft sleeves with pressure clear water in for lubrication.
Materials of main parts of Vertical Turbine Pump for water intaking:
Impeller: Cast iron, Cast steel Stainless steel or bronze
Shaft: High quantity carbon steel or stainless steel
Others: Cast iron, steel or Stainless steel
Instruction of Vertical Turbine Pump for water intaking
For example: 500LC-49
500: Pump outlet diameter (mm).
L:vertical mixed flow pump.
C: Centrifugal pump.
49: Head at design point.
Features
LC series Vertical Turbine Pump for water intaking can be designed as single or multi-stage to meet the user's a wider range requirement of flow and head. The pump outlet can be designed on the top of or below the base layer.
Reduce the user cost
Using advanced hydraulic model, the pump is with high efficiency and stable performance. Vertical construction could saves the space of the pump station room, which could also save the cost to build the pump station.
Main standard during the pump design, production and testing.

GB6245-1998

GB/T3214-91

GB/T3216-2005

JB/T443-92

JB/T3564-92

JB/T3565-92

JB/T3565-92

performance requirement and test measure of fire fighting pump

test measure of capacity for water pump

rotor dynamic pumps-hydraulic performance acceptance tests-grades 1 and 2

technical conditions for centrifugal long shaft pump

types and basic parameters of deep well long shaft pump

centrifugal pump efficiency

centrifugal pump efficiency