China Waterproof Access Control Keypad for Automatic Doors

Key Features of Waterproof Access Control Keypad for Automatic Doors
1. Exquisite design, silver plated keypad with back light
2. Output with protection function, waterproof and damp proof, suitable for outdoor use
3. Multifunction device, can use as a WG26 card reader alone
4. Three opening mode: card, code, card+code
Features of waterproof access control keypad for automatic doors:
1. Energy saving: Low power consumption, standby current is less than 30mA
2. Night vision function: With luminous keyboard, able to operate at night
3. Large storage capacity: 2,000 users
4. Independent password: Can use the password only
5. Users convenient: Users can change the password by themselves
6. Fast identification speed: Able to open the door in less than 0.1S.
7. Output short circuit protection function: System will automatically turns off output when the electric lock or alarm's output short circuit is within 100μS.
8. Wiegand output: Wiegand interface, support Wg26, Wg34
9. Safety protection function: In case some card is lost, the keyboard can remove the card number directly, completely eliminate security risks
10. Alarm system: There will be special built-in buzzer alarm sounds upon malfunction
Picture of Waterproof Access Control Keypad for Automatic Doors
Technical Specifications of Waterproof Access Control Keypad for Automatic Doors

Voltage
AC&DC9-28V±10%
Static Current
≤30mA
Capacity
2000 users
Ambient Humidity
10%~90%
Alarm output
≤20A
Open time
0~10s(adjustable)
Operating frequency
125 KHz
Card-reading distance
2~5cm
Ambient Temperature
-35°C~60°C
Electricity lock output
≤3A
Output short circuit protection time
≤100μS
Size
120 *80*25mm

Overview
It is a vandal resistant proximity card and keypad access control unit suitable for external applications. The unit accepts up to users and provides entry via the use of proximity cards and/or pin codes. Suitable for small scale area such as small office, family, storage room, passby door etc. Programmed on keypad.
English, Chinese (other language can be customized)
Opening Mode: Password, card+password, card+card, password+password.
EM card reader inside, reading distance: 65mm
Code keypad inside for 4 number password input
Ring control and alarm for preventing picking lock inside
Optional accessory: Ring and alarm assistance relay output
The bell key can change to * key! (optional)
Other Automatic Doors Accessories
1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.