China Welding Flux Saw Flux Submerged Arc Welding Flux

China factory high qualityFused WeldingFluxLH-HJ107 For Stainless Steel wire, flGeographic Surveying Instrument ux-cored wireTracy Mob:+8618563406379Specifications:
GB/T17854-1999 F308-H0Cr21Ni10Description:
Flux LH-HJ107 ,it is aNo-manganese-Oxide fused flux with pumiceous granule of blue gray to dark gray color, about 10- 50 mesh in size.It uses direct-current. When it is used under higher arc voltage, the penetration is shallow, and the arc is stable. the arc is stable and the appearance of weld is pleasing.Meanwhile,the consumption of flux is low and it is easy to detach the welding slag. Suitable for large area stainless steel clad layer surfacing. It is designed for welding of austenitic stainless steel and is of characteristics with less carbon increment and less chromium loss.Applications:
This flux is recommended to used with H308,H308L,H347 wires and strips do welding of stainlesss steel and anti-corrosion cladding of nuclear pressure vessel and petrol chemical installationsElectromagnetic Equipment .
It is also used for repair welding of high manganese steel with H0Cr16Mn16. Cooperate with corresponding flux-cored wire, used for squeezing roller, hot roll, casting roller, supporting roller, mill roller surfacing.Chemical Composition(%)SiO2CaF2Al2O3CaO+MgOSPother26-3018-2424-3014-21≤0.040≤0.040≤10
Mechanical Performance of the Deposited metalWIRETensile strengthElongationRm/MPaA(%)F308-H0Cr21Ni10≥520≥30F316L-H00Cr19Ni12Mo2≥480≥30
The instruction of usage:
Redried the flux at 350ºCfor 2hours before use;
Remove the rust,oil and dirt from the surface of welding groove.Packing Details:
Bag:25 KGS/Kraft Bag With Plastic Lining Inside
Pallet:40 Bags(1 Ton)/Plywood Pallet
Container:20-24 Tons/ContainerIndustrial Humidifier & Dehumidifier
OEM Packing Design Can Be Accept According To Your RequirementOur service
1)Prime quality+Competitive price+Thoughtful Service=100% Satisfication
2)We can researMass Transfer and Separation Equipment ch and produce customerized fluxes according to your different demands.
3)SAW Welding Flux Expert- One Stop Solution For Submerged Arc Welding consumables.Technical datasheetstainless steel welding wireAWS A5.9 ER308
Description: The main chemical composition of stainless steel welding wire ER308 is 18Cr-8Ni. The weld metal has good mechanical properties, intergranular corrosion resistance and good crack resistance.
Application:Stainless steel welding wire ER308 can be used for welding austenitic stainless steel of type 18-8, 18-12 and 20-10. It is usually used for welding of similar composition, especially the type of 304.Chemical Composition of Welding Wire(%)
GV=Guarantee ValueTest ItemCMnSiSPCrNiMoCuGV≤0.081.0~2.50.3~0.65≤0.03≤0.0319.5~229.0~11.0≤0.75≤0.75Typical0.051.790.370.0110.02320.159.520.0080.09
Mechanical Properties of Deposited metal
Test ItemRm(Mpa)ReL(Mpa)A(%)KV2(J)Typical580-42-
Size & Recommended Current (AC/DC)
WA(A)=Welding Current (A)Dia(mm)φ2.5φ3.2φ4.0φ5.0Current(A)80~140250~350350~450400~500
X- ray Inspection: IInstruction:
The wire should be kept in dry place.
The stains on the weldments, such as rust, oil stains, moisture, etc., must be cleared away.
APPLICATION:
Factory Scale:
Laborary:
Warehouse:
Essen Fair:
Factory Introduction:
LAIWU HULIN WELDINGCrane MATERIALS CO.,LTD. istop three original factoryof Submerged ARC welding flux in China.
Factory was founded in 1994, quality systerm: ISO9001-2008.
Main products: SJ101,SJ101G,SJ301,SJ50,SJ601.HJ431,HJ107,HJ260 etc.
Application: Spiral steel pipe,API pipe, Structural steel, LPC Gas Cylinder, Pressure vessel, Boiler, Bridges etc.
Yearly capacity:30000mt
OEM &buyer label is ok. Technical support can be offered.FAQ:
Q. 1Can you provide free sample?
A: Total free sample(including freight cost) can be offered
Q. 2What is your delivery time?
A: Within 7daysafter receiving deposit.
Q: 3Is your price competitive with other companies?
A: Our goal is to give the best price with same quality and best quality with the same price. We do everything we can to reduce your cost.
Q. 4How about OEM?
A:OEM IS OK.
Q. 5Why we should choose your company?
A: Firstly, we areORIGINAL factory. We canguarantee delivery timeand provide special requirements for customers.
Secondly, we have professional foreign trade team with highefficiency communications and professional solutions.
Thirdly, we have special team work for after salesservices 24*7to help you slove any kind of problem