Color coated Aluminum Strip for shutter (1100, 3003, 3105)Signi's Color-Printed Aluminum Strip is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.Color-Printed Aluminum Strip.DimensionsParameterRangeStandardToleranceThickness (mm)0.18 _ 0.250.18, 0.20+/-0.005Width (mm)50 _ 1250867, 762, 584+0.5, -0Length (mm)400 _ 1000-+0.2, -0Diagonal difference for sheet (mm)1 max--Coil sizes (mm)OD: 1450 max
ID: 75, 150, 305, 405, 505--Coil density (kg/mm)3.5 max--Offer for thickness and width outside the range may be quoted on specific request
TOP COATINGTESTMETHODRESULTSCoating naturePVDFStandard PEThicknessECCA T1Color:20±2um Primer:5+2um or according spec.Color:18-2±2um, or according spec.Specular GlossECCA T2Standard ±5%Standard ±5%Color differenceECCA T3⊿E<1(Non-metallics colors)⊿E<1(Non-metallics colors)PolimerizationILA-06>100 DF>100 DFPencil HardnessECCA T4≥F≥FImpactECCA T5100%100%Adhesion (Cross cutting+Erichsen)ECCA T6>75%>75%BendingECCA T7≤2T≤2TResistant to salt acetic acid spray testECCA T81000h/class 3 (According to EN1396/C 6.5)(Depends on specification)1000h/Class 1(According to EN 1396/C.6.5)Water immersion resistanceECCA T91000h-B2S2--Resistance to QUVB testECCA T1010 00 h Gloss Retention ≥90% ⊿E≤2500h Gloss Retention ≥30% ⊿E≤5Florida testClass 3 (According to EU1396/C 6.3)Class 3 (According to EU1396/C 6.3)
BACK COATINGTESTMETHODRESULTThickness coatingECAA T15±2umBendingECAA T7≤2TPolimerizationILA 06>100 double roubsAdhesion after cross cuttingECAA T6OKAdhesion after ErichsenECAA T6OKResistance to Salt SprayECAA T81000 hoursBack coat epoxy blue:
Good adhesion to adhesive and PU foam.
Good resistance to corrosion.
Back coat epoxy grey:
Good adhesion to PE(composite panel)
Good resistance to corrosion