Dcs 1800MHz Single Wide Band Pico Repeater

Specifications of DCS1800 Wide Band Pico RepeaterThe Pico Repeater provides an affordable solution to solve the indoor signal coverage problems due to signal fading and attenuation caused by architecture obstacles. And its easy installation and maintenance can help carrier get fast return.
The repeater is working as a relay between the BTS and mobiles. It picks up the strongest signal from BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Indoor Signal Distribution System to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
The Pico Repeater can amplify the signal within the customized band.
Features
Two signal ports with full duplex design
High system gain
Linear power amplification to effectively suppress inter-modulation and spurious emission
Smart Automatic Level Control (ALC) ensures output level stable and adjustable continuously
Unique color LEDs to indicate power supply and state and alarm
Simple installation with external AC/DC adapterApplicationsTo expand signal coverage or fill signal blind area where signal is weak or unavailable.Indoor:Hotels, exhibition centers, basements, shopping malls, offices, parking lots, …
Application Diagram
Technical SpecificationsModelBT-DA17ASystemDCSFrequencyUplink(Customized)1710-1785 MHzDownlink(Customized)1805-1880 MHzMaximum Gain≥65 dBMaximum Output Power(Customized)17dBmAGC control range≥20dBMaximum Input power
(Non-destructive)≤0dBmIn-Band Ripple≤ 5 dBI/O Impedance50 ΩNoise Figure≤ 6dBGroup delay time≤ 5μsVSWR≤ 2.0Spurious Emission9kHz~1GHz: ≤ -36dBm/30kHz1GHz~12.75GHz:≤-30dBm/30kHzThird-order Inter-Modulation≤ -40dBcRF ConnectorN-Type (Female)Power Consumption≤ 20WPower SupplyAC100~ 240VDimensions186*122*65mmWeight1 kgAlarm Monitoring SystemAlarm for uplink self-oscillationIndication LEDPower supply, Alarm, stateOperating Temperature-10 ~ +50 °CApplicationIndoor(IP30)Relative Humidity Range≤95%Product Description
It supports wall mounting installation, follow the instructions below.
First of all, choose a mounting position for the PICO Repeater in indoor environment. Use the hanger that comes with the repeater package, and fix the hanger on the wall where repeater is going to be installed, use the hole on the hanger to secure the hanger on to the wall.Use the back of the repeater to hang on the bracket and complete the installationFasten the PICO Repeater with expansion bolts equipped with PICO Repeater package.The BTS port on PICO Repeater is connected to the donor antenna, MS port is connected to the service antenna.System is supplied by AC220V power via connection of the external extension power cable.The system works properly under the condition of having enough system isolation.With obstruction or no, it must ensure the distance of 5-30 m between the donor antenna and service antenna.