Drag Chain Conveyor Auto Rain Wiper Armature Assembly Line

Products Info
This armature production line is constituted of a main ope-ration panel(including feeding and discharging entrance), a armature automatically inserting paper machine, two or more than two automatic armature winding machines, a rotor wedge inserting machine, a commutator double-head automatically welding mac-hine, a double-head automatically testing machine, combining with a loop conveying line for armature production. The workpiece first is put inside the production line through the operation panel, the whole production line will complete the corresponding work according to the setting techniques, at last, the workpiece goes back to the discharging entrance, then the system will take out the workpiece. Separately setting the display, operating, acousto- optical, etc functions for each of procedure equipment.Function and Features
1. The hardware is of flexibility. With the advanced and mature manufacturing design for the main machine combining with European import plate-type chain conveyer system, the va-rious plane layout will be achieved.
2. All aluminum alloy frame, the appearance is simple, elegant.
3. The soft ware is of flexibility, the line body uses PLC+8 intelligent ID auto identification control system, each of procedure can automatically identify and read and write the processing state of work piece, which makes the whole production line body to adapt to the requirements for all kinds of production steps.
4. The main operation panel can monitor and inquire about the whole production system, fulfill to read and write the state of procedure through manual operation, and change the processing sequence of work piece.
5. Compared with pneumatic conveyer system, this conveyer line has the advantage of high conveying efficiency and low noise; When transporting the workpiece, don't hurt them; Thanks to the plate chain construction combining with ID intelligent identification, the wiring layout is flexible.Technical Parameter
1. Power voltage: 380V± 10%, 50Hz
2. Air source pressure; 0.4-0.7Mpa
3. Rotor diameter: Φ23-Φ54 mm special available on request
4. Rotor shaft length: 50-220 mm, special available on request
5. Commutator diameter: ≤ Φ45 mm, special available on request
6. Stack thickness of rotor: ≤ 15-65 mm, special available on request
7. The No. Of rotor slot: ≤ 8-24 special available on request.
8. Conveyer plane construction: ""shape,
Power voltage380V± 10%, 50Hz