Efficient Slab Formwork Kitsen Fastform and Easy Operating Slab Formwork for Flatslab

Product DescriptionKITSEN Fastform is an advanced aluminum panel-prop-formwork system which allows early stripping operation.No Restriction, Can be adjusted by Changing the Prop.Product ParametersProduct NameKitsen Fastform SystemMaterialAluminum Alloy 6061-T6, Birch PlywoodBasic ComponentsPanel1800x1200mmFiller Beam1800/1200/900/600mmTruss1800x600mmOthersProp, Lock Pin, Guardrail Post, Cantilever Support BraceAdvantagesFast &Efficient-Modular components, beam and panel are made of aluminum which is light enough to erect, strip and disassemble.One worker can assemble 27m2per hour, and dismantle 54 m2per hour. (One worker can install 100m2-140m2per day.Allowable concrete thickness≤300mm.Birch plywood thickness: 10mm.
Safe&Reliable-Stable system with 6-direction locking restrictionsSimple-only three basic components: Panel, crown, prop
Product Assembly Description:1. Check that all components are on site, undamaged and that they are functioning correctly -(refer to Checklist and Quantity Schedules).
2. Damaged or incorrect components shall not be used.
3. Make sure the panel is clean before assembly.
4. Handle panels with care during transit, avoid bumping and collision.
5. Do not hit, pry and drop panels roughly when stripping.
6. Assort and pile up panels properly. Handle panels with care.
7. Keep in mind that the maximum safe working load capacity is 13.75KN/ m2.