Manual Horizontal Rotary Tables

1. These horizontal rotary tables are used for indexing, circular cutting, angular setting, boring, spot facing operations and similar work in conjunction with worktables on milling machines, boring machines, drilling machines etc.2. On requests, aflange for connecting scroll chucks or indpendent 4-jaw chucks is specially supplied and packed independently;3. As an optional accessories for these rotary table to extend performance range, adividing plate accessory can be supplied and allows the operator to accurately divide the 360 deg rotation of the clamping surface into divisions of 2through 66 and all numbers of divisions which are divisible by 2, 3and 5from 67-132.SpecificationsRT160ART200ART250ART320ART400ADiameter of table, mm160200250320400Morse taper of center hole2#3#4#Diameter of center hole, mm25X630x640x10Width of T-slot, mm101214Adjacent angle of table T-slot, Deg9060Width of positioning key, mm121418Modules of worm gear1.51.7522.53.5Ratio of worm gear1:90Graduation of table, Deg360Rotating angle of table responding to one revolution of the worm, Deg4 (1 per graduation)Min. scale of vernier ,Sec10Indexing accuracy, Sec8060Max. load capacity, Kgf100150200250300Net weight, Kgs16.522.533.565125Gross weight, Kgs21.53144.576145Packing size(LXWXH), cm40x33X2044X36X2150x40x2158X48X2475X62X280
SpecificationsRT500ART630ART800BRT1000ART1250ADiameter of table, mm50063080010001250Morse taper of center hole5#6#-Diameter of center hole, mm50x1275X14Width of T-slot, mm1822Adjacent angle of T-slots, Deg45Width of positioning key, mm1822
Modules of worm gear3.54.55.55Ratio of worm gear1:1201:180Graduation of the table, Deg360Rotating angle of table responding to one revolution of the worm, Deg3 (1 Minute per graduation)2Min. scale of vernier ,Sec10Indexing accuracy, Sec6030Max. load capacity, Kgf550700125020003000Net weight, Kgs21534584513001900Gross weight, Kgs23837790014002000Packing size(LXWXH), cm85X73X3099X90x33120x110x44142X135X47158X158X50
SpecificationsRT1600ART2000ART2500ADiameter of table, mm160020002500Diameter of center hole, mm100120140Width of T-slot, mm22Angle between adjacent T-slots, Deg22.5Module of worm gear8Ratio of worm gear1:1201:180Graduation of the table, Deg360Rotating angle of table responding to one revolution of handwheel, Deg32Min. graduation of vernier ,Sec10Indexing accuracy, Sec60Max. load capacity, Kgf5500850010000Net weight, Kgs48007000
Gross weight, Kgs

Packing size(LXWXH), cm
Dimensions of the series of RT160A...1250A rotary tables:
RT160ART200ART250ART320ART400ART500ART630ART800BRT1000ART1250AA26029033041053064082098011701400B19623628636045056070089010801300C332369422493612752898108012951420DΦ160Φ200Φ250Φ320Φ400Φ500Φ630Φ800Φ1000Φ1250G1214141818222222-22H758090110140158.5160245250283J1214141818202030-30K7689.75102.5128.5180230295364364487.5L194211241273337392468535654690MMT #2MT #3MT #3MT #4MT #4MT #5MT #5MT #6MT #6-P2729.530.544606068106106116Q125125125125160160220250250250dΦ25Φ30Φ30Φ40Φ40Φ50Φ50Φ75Φ75Φ75h66610101212141414
Dimensions of RT1600A rotary table:
Dimensions of RT2000A rotary table: