Multi USB Wall Charger Interchangeable Charger USB Adapter Us EU UK Au and Kc

Multi USB wall charger interchangeable charger USB adapter Us EU UK Au and KcOutput:Output Voltage:5VDCOutptu Current:2ADC Plug:1USB PortAC plugInterchangeable AC plug (US/EU/UK/SAA/KC)
1.5V 2A Interchangeable AC plug USB Charger
1. ELECTRICAL PERFORMANCE5VDC 2A USB Charger :
1.1SAFETY STANDARD
1.1.1The green mode power supply shall be certified by the following international regulatory
standards:
CertificationCountryCertified StatusStandardULUSAAPPROVEDUL60950-1:2007cULCANAPPROVEDCAN/CSA-C22.2 NO.60950-1(2007)FCCUSAAPPROVEDPart 15 Class BTUV GS(BS)EuropeAPPROVEDEN60950-1/A11:2009CEEuropeAPPROVEDEN55022:55024/EN60950-1SAAAustraliaAPPROVEDAS/NZS 60950-1:2011&AS/NZS 3112:2011PSEJapanAPPROVEDJ60950,J55012KCKoreaAPPROVEDK60950-1, KN32&35
1.2INPUT FEATURE
1.2.1 INPUT VOLTAGE RANGE:90Vac to 264Vac.
1.2.2 RATED INPUT VOLTAGE:100Vac to 240Vac.
1.2.3 INPUT FREQUENCY RANGE:47Hz to 63Hz.
1.2.4 INPUT CURRENT:0.30A max. (I/P100-240Vac).
1.2.5 INRUSH CURRENT:40A max. at 100-240Vac input for acold start at 25ºC.
1.2.6 EFFICIENCY: Higher than 73.4% at 100-240Vac input and output (25%, 50%, 75% &100% load.).1.3. OUTPUT FEATURERATED OUTPUTSPEC. LIMITREMARKMin. valueMax. valueOutput regulation4.75V DC5.25VDC≤ ≤+/-5%Output load0.0A2.0ANo Load Power consumption-0.1WInput voltage:100-240VACRipple and Noise-150mVp-p20MHz Bandwidth 10uF Ele.
Cap. &0.1uF Cer. CapOutput Overshoot-10%Line regulation-+/-1%Load regulation-+/-5%Turn-on delay time-3000mSHold up time10mS-Input voltage:115Vac20mS-Input voltage:230Vac
1.4. ELECTRIC WITHSTANDING STRENGTH(HI-POT)
Primary to Secondary AC3000V/10mA ,1 minute for type test. 3second for
production.1.5. PROTECTION FEATURE
1.5.1 OVER-CURRENT PROTECTION:
The green mode power supply shall be hiccupped when any output operating in overload condition(set@ Max load 110 ~160 %) under any line condition for an indefinite period of time. The power supply shall be self -recovery when the fault condition is removed.1.5.2 SHORT CIRCUIT PROTECTION
The power supply shall be hiccupped and no damage shall occur when any output operating in ashort circuit condition under any line condition for an indefinite period of time. The power supply shall be self-recovery when the fault condition is removed.1.6. ENVIRonMENTAL CONDITIONS
1.6.1 OPERATING :The power supply shall be capable of operating continuously in any mode without performance deterioration in the following environmental conditions.
1.6.1.1 Ambient Temperature:-20ºC~40ºC
1.6.1.2 Relative Humidity:10%~90%
1.6.1.3 Vibration:1.0mm, 10-25Hz,15 minutes per cycle for each axis (X, Y, Z)
1.6.1.4 Cooling:The power supply will operate with convection cooling .Blocking of vents
must not cause damage to The power supply.1.6.2 NON-OPERATING
he power supply shall be capable of withstanding the following environmental conditions extended periods of time, without sustaining electrical or mechanical damage and subsequent operational deficiencies:
1.6.2.1 Ambient Temperature:-30ºC~70ºC
1.6.2.2 Relative Humidity:10%~90%
1.6.2.3 Vibration and Shock
The power supply shall be designed to withstand normal transportation vibration per MIL-STD-810D, method 514 and procedures X, as it smounted in the chassis assembly and packed for shipping.
1.7. EMC STANDARDS1.7.1 EMI STANDARDS/EMI
The power supply met the radiated and conducted emission requirements for FCC CLASS B,EN55022 CLASS B.1.7.2 EMC STANDARDS/EMC
The power supply shall meet the following EMC standards:EN 55024: 1998+A1: 2001+A2: 2003; Part 15 Subpart B, IC ICES-0031.8. Energy Saving (Level VI /Level 6)
1.8.1 US DOE: Office of Energy Efficiency and Renewable Energy 10 CFR Parts 429 and 430
1.8.2 CEC: Appliance Efficiency Regulations (California Code of Regulations, Title 20, Sections 1601 through 1608) dated July 2015
1.8.3 NRCAN: Amendment 11 to the Energy Efficiency Regulations for External Power Supplies, published on October 12, 2011 in the Canada Gazette, Part II
1.8.4 Other (Specify): International Efficiency Marking Protocol for External Power Supplies -Level VI
1.8.5 Other (Specify): Australian (GEMS) and New Zealand :AS/NZS4665.1-2005+A1:2009; AS/NZS4665.2-2005+A1:2009
1.8.6 Other (Specify):EU Directive for Energy-related Products ErP 2009/125/EC and Implementing Measure (IM) no. EC278/2009 for External Power Supply
1.8.7 Other (Specify):Code of Conduct on Energy Efficiency of External Power Supplies Version 51.9. RELIABILITY AND QUALITY CONTROL
1.9.1 MTBF :The predicted and demonstrated MTBF must be greater than 50K hours at 25º C.
1.9.2 BURN-IN :The power supply shall undergo aminimum of 4hours Burn-In test
under full load at 40 ºC~±5 ºC
1.9.3 COMPonENT DERATING :Semiconductor junction temperatures shall not exceed the manufacturer's maximum thermal rating.
1.9.4 QUALITY GUARANTEE :2 years warranty.1.10.WEIGHT :The weight of the power supply shall be about 150g
1.11. MECHANICAL REQUIREMENT :The power supply size:L62*W39*H32mm.
1.12. INSULATION RESISTANCE :Input to output:50M OHM(500VDC)
1.13.LEAKAGE CURRENT :The leakage current shall be less than0.25mA forclass II when power supply is operated maximum input voltage and maximum load.
1.14. MAJOR MEASURE EQUIPMENT :
A.AC SOURCE :AFC-500W
B.POWER METER :CHROMA 2100
C.ELECTRonIC LOAD :PRODIGIT 3310C
D.OSCILLOSCOPE :TDS-2012B
E.DIGITAL MULTIMETER :Fluke 4.5
F.DC POWER :WYK-6030
G.HI-POT TESTER :LANKE ELECTRonICS 7112
H.INSULATION RASISTANCE TESTER :YD2681A
1).: White text on Black ground.
2).; 100ºC-PET materials, Temperature under 100˚C.
3).: Silk Screen printing, wipe resistance.
4).: Everlasting Gummed.
5).: Compliance to RoHS.
6).: YYMM means Date Code
7).: MM means Month (like 01-12)
8).: YY means Year (like 18)
1.15. about Merryking Factory:
MERRYKING as afamous manufacturer of switching power supply and transformer has exported power supply products over 14
years since we established, We are focusing on power supply designing and manufacturing in Shenzhen China.
We established scientific, intact and efficient quality management system, which extends from product designing, raw material control, on-spot production management to after-sale services with constant, stable and reliable quality assurance. ISO9001:2008 system is fully implemented in our all managements.
Our products have passed most of safety approvals in the world including UL, cUL, FCC, PSE, GS, CE, SAA, CCC, C-tick, CB, etc.
1.16. Our Premium Service:3 Years Warranty :36 months,for all products
Quality makes that we have enough confidence to offer our clients longer warranty. We are one of the very few companies who offer 3years warranty in the worldwide market.
Free Samples
1-3 pcs free samples for each model
We can offer you 1-3 free samples for quality and function test before bulk orders.
Faster Reply :Save Your valuable Time
Our professional sales team will give you the fastest reply by Trade Manager, Email, Telephone etc according to your any product inquiries or questions during 24 hours.
Faster Lead-Time :
·Production capacity 500,000 PCS per month, short lead time: 10 -15 working days.
·The fastest delivery
Professional workers and production ability will make sure that the delivery of your order can be finished in time.
Easy Deal
Easy and convenient deal for you
We can offer you any kind of trade terms, including EXW,FOB,CIF,DDU(custom clearance door to door service without taxes) and DDP(custom clearance door to door service with taxes) and also help you to choose the most suitable shipping way to save more time and money.
Safe &Reliable
·You are welcomed to check the qualityof goods before delivery.
·With almost all of related certificates
Our products have completely been approved UL,cUL,FCC,CCC,GS,CB,CE,TUV,SAA,KC,ROHS,PSE,etc.
Our products fully satisfy the safety certifications standard. High product stability,like MTBF=50000?100,000 (Calculated Hours at 25°C )
After-Sale Guarantee Service
You can ask for arefund within 30 days after your receipt of goods We will bear all of the costs if it is because of the quality.Or,we will offer you the new goods as soon as possible.
FAQ
Q: What is the main product of your company ?
A: 1. AC DC Power Adapters 2. USB Smart Charger 3. QC charger
Q: What certificates do you have ?
A: Our products have completely been approved UL,cUL,FCC,CCC,GS,CB,CE,TUV,SAA,KC,ROHS,PSE,etc. In order to make you fully understood the quality of our products,we would provide you with related certifications on your request.
Q: What`s your MOQ?
A: There is no MOQ and you are welcomed to order any amount.But you will get discount price for bulk order.
Q: Would you give me more details about the price of your products ?
A: We believe our quality and price are very competitive in worldwide market and We promise to offer you best cost-efficient products with higher quality.
Q: How can Iget the matched adaptor production with only requirements/description ?
A: Ok Dear client, We`ll introduce you the matched products
according to your descriptions. Please kindly CLICK HERE to describe your requirements with following necessary tips :
a. What's the input please? Example:100-240VAC, 50/60Hz2
b. What's the output, please? Example: 5V DC 2A
c. What certificates do you need ?Example:UL+FCC needed
The more details you provide,the faster we could provide you with the corresponding products.
Q: Isaw your company is with much experience in adapter field.Will Iget better products than Iexpected under your guidance/suggestions ?
A: We aim to support our dear clients ,to achieve Your successful business with products quality and competitive price ,as well as 3years warranty (longer warranty in this filed).
Also, we will offer you more necessary experience for free. For example,a.If your product working current is 1A ,we suggest you to use 12v 1.5A model ,so the adapter can keep good working status and long life ,and the working temperature is very low ,the 12v 1.5A adapter's price is nearby with 12v 1A .b. If your product belong to medical device ,the quality standard should be IEC 60601 ,if your product belong to IT device ,the quality should be IEC 60950.
Q: What payment term do you accept please ?
A: We accept T/T,L/C,D/P,Western Union paypal etc.
Enjoy work with MERRYKING. THANKS!Contact Detial :Nikki Xinag
Sales ManagerCell phone :+86 -159 14085671
www.merryking.com