Pebble Embosed FRP coated PP honeycomb sandwich Panel for partition
pp honeycomb sandwiched FRP panel
Structure:FRP skin+ pp honeycomb core+ FRP skin
Surface choices: Both Flat and Decorative Skin
Overview:Thickness:8mm-100mm,according to your applicationWidth:up to 2800mm,standard size 1.22mLength:2440mm standard, can be customer specificColors:RAL-, scale or customer-specific shadesuv/weatheringExcellent protectionFinish choices:Versatile, meeting different require.
Gel coat availableHonEYCOMB CORE SpecificationsLightweightImpact ResistanceThermal InsulationQuietCorrosion Resistant and Rot ProofManufacturing Tolerances Thickness:0.5mm
Width ± 2mm
Straightness ± 2mm (Adjacent corners)
Squareness ± 3mm (Diagonal corners)
Length ± 1/8"
Exterior FinishGel Coat. 15 mils (± .003") of a smooth, high gloss gel coat designed to offer superior weathering
characteristics and resistance to UV degradation. All standard gel coats are formulated
to offer good flexibility, are acid and alkali resistant and when the surface is properly prepared, will readily accept decals and most paints.
Interior Finishes
Standard - Clear film. A thin clear film is laminated to the interior surface of the panel during the
composite panel production process. This heat sealable film covers typical porosity and provides a surface
which is considerably easier to clean than raw resin surfaces.Optional - Resin Surface.
For applications where sanding, laminating, or bonding to the interiorsurface of the panel is required, upon request,
Hengyi will eliminate the use of the clear film. A white pigmented polyester resin will be the final interior finish and
will contain porosity on the surface.
Optional - Gel Coat. Where additional protection against moisture penetration is desired,Yangzhou Hengyi will add 15 mils (+-.003")
of high gloss gel coat to the interior surface on special orders