Rx-02belt Conveyor Armature Assembly Line

Products Info
This assembly line is designed for specially making the armature of the micro-motor(the commutator can be either hooking-type or slotting-type), this armature assembly line consists of the main operation panel (loading and unloading entrance), automatic armature cheek insertion machine, automatic armature insulation paper insertion machine, automatic commutator insertion machine, automatic slot cutting machine, automatic winding machine, automatic welding machine, automatic sledge insertion machine, rotor testing machine, automatic resin trickling machine, automatic turning machine, auto commutator surface testing machine, balancing machine, linked with a closed-loop conveyor line. When the armature is placed on the assembly line through the operation talbe, so the whole line will automatically complete the processing work for each of working positions following the corresponding processing techniques, then the armature is transported to the unloading entrance to be taken out. Each of machines have independent functions, such as setting, display, operation, acousto-optical alarm, etc.Function and Features
1. With advanced and sophisticated production technology for the main machines combined with European flatchain conveyor line, to construct the different kinds of plane structure.
2. High-strength aluminum frame, graceful and concise.
3. The line adopts intelligent ID auto indentification control system, the system can automatically read and detect the processing state of each of working position to make the wire to adjust to various processing requirement for parts.
4. Through the main panel, the whole production system can be monitored and checked, by inputting the work instructions, read and write he working process state, change the processing sequence, it is interface-friendly to operate.
5. Compared with pneumatic conveyor line, this line has higher conveying productivity and less noise, not mark the parts; Since the flat-chain structure are combined with and ID intelligent indentification, the wire lay-out can be more flexible and diverse.Technical Parameter
1. Power voltage: 380V ± 10%, 50Hz
2. Air source pressure: 0.4~0.6Mpa
3. Armature diameter: Φ23~Φ85mm
4. Armature shaft length: 68mm~200mm
5. Commutator diameter: Φ18mm~Φ45mm
6. Armature stack: 26mm~60mm
7. Armature slot No.: 8~48
Power voltage380V ± 10%, 50Hz