Sanitary Mixing Tank Stainless Steel Agitator

Stainless steel agitator
1. Overview of Stainless Steel Mixing Tank Products
Stainless steel stirring tank is a device for mixing, mixing and blending materials. It is suitable for the synthesis of proportion solution and neutralization of acid and alkali in dairy and fine chemical industries. It has the functions of heating, cooling, heat preservation, stirring and metering. The main body of the equipment adopts SUS304/316L high-grade stainless steel material, and the material is evenly mixed through the mixing device in the tank. The impeller is dispersed and broken by using the agitator, the oxygen dissolution rate is high, the mixing effect is good, and it is in line with the national GMP hygienic standard, and is widely used in food, medicine, chemical industry, coating materials, building materials and other industries.
2. Structural Composition of Stainless Steel Mixing Tank
Stainless steel mixing tank is mainly composed of four parts: stainless steel tank body, head, jacket and mixing system. Additionally, mixing tank cover, jacket or coil, transmission device, shaft encapsulation device, insulation medium, support, coolant inlet and outlet, temperature sensor interface, PH automatic control system, pressure sensor, air breather, CIP interface and other components are set up.
The tank body of stainless steel mixing tank is made of SUS304/316L high-grade stainless steel. The inner cylinder wall is polished by mechanical polishing or electrolytic mirror polishing. The outer cylinder wall is insulated by 304 fully welded structure, and the outer surface is treated by mirror or matt. The cover of the mixing tank is equipped with transmission device (motor or reducer), which drives the mixer in the tank to mix the material. The shaft encapsulation device adopts professional mechanical seal or matt treatment. Packing seal, good sealing performance, hygienic quick-open joint for outer connection of cylinder body, safe and hygienic without dead angle, in line with national GMP hygienic standard.
In addition, it is equipped with temperature control device, temperature measuring hole, CIP automatic rotating spray ball, defoamer, baffle, air distributor, temperature sensor, mirror spotlight, liquid level meter and other equipment, which is convenient for manual operation and simple and reliable.
3. Structural Characteristics of Stainless Steel Stirring Tank
3.1 The stainless steel mixing tank body is made of SUS304/316L high-grade stainless steel. The inner and outer surfaces are polished. The polishing accuracy is less than 0.4. It is sanitary and has no dead angle, which can prevent the material from sticking to the wall and is easy to clean. The outer tank body is treated by wire drawing.
3.2 The mixing system adopts advanced frequency conversion speed regulating device, which can set different mixing speed according to the technological requirements and realize automatic control of the mixing process.
3.3 Steam high temperature on-line sterilization can be realized in the stirring process, automatic control can be realized in the sterilization process, and the sterilization temperature is accurate.
3.4 The selection of mixer equipment is diversified. Various types of mixer equipment, such as propeller type, anchor type, frame type, turbine type and magnetic mixer, can be selected according to different processes.
3.5 The tank body of stainless steel mixing tank is equipped with a jacket insulation layer. The insulation medium can be made of polyurethane insulation material, which has good insulation performance.
3.6 After mixing, CIP automatic rotating spray ball can be used for on-line cleaning, which is efficient and hygienic.
4. Technical parameters of stainless steel agitatorTypeOutline size(mm)Total power (conventional configuration)Motor power(KW)Agitation speed(rpm)PYG-50400x400x16000.55120PYG-100500x500x17000.75120PYG-150500x600x18000.75120PYG-200700x500x18001.1120PYG-300800x600x20001.5120PYG-400900x900x20001.5120PYG-500900x1100x20001.5120PYG-10001000x1200x33002.2120PYG-20001200x1500x32003100PYG-30001500x1500x3600480PYG-40001700x1800x38005.536PYG-50001800x1800x40005.536
5. Quality Standard for Stainless Steel Mixing Tank
Design, manufacture, supervision, inspection and execution:
Law of the People's Republic of China on Safety of Special Equipment
SFDA Standards for Quality Control of Pharmaceutical Production
TSG21-2016 Regulations for Safety Technical Supervision of Fixed Pressure Vessels
GB150-2011 Pressure Vessel
NB/T47015-2011 Welding Regulations for Pressure Vessels
NB/T47013-2015 Non-destructive Testing of Pressure Equipment
HG/T20584-2011 Technical Requirements for Manufacturing Steel Chemical Containers