Sx-01full Automatic Stator Assembly Line

Products Info
The assembly line is used in automatically processing the stator for the series motor. And consists of staor insulation paper insertion machine, stator end plate insertion machine, stator terminal insertion machine stator winding machine terminal clamping wire machine, terminal welding machine and stator testing machine, marking code machine. These machines are combined together with a flat belt conveyor to achieve automatically processing finished stator. once the unfinished stator is flowed into the conveyor line, each of machine will proceed to operation according to the setting parameters. After being treated, the stator will go back to the position for unloading. Each of work position have inde pendent functions, such as setting, display and acouso-optical alarm, etc, also switch in line into single machine work.Function and Features
1. Combining sophisticated and advanced technology of main machine with flat belt conveyor line, can have various kindsof lay-out design;
2. High-strength aluminum frame, graceful and simple;
3. Adopt intelligent ID indentification control system, and can automatically indentify and read stator processing state on each of work position so as to adjust to various and complicated processing technique requirement.
4. With twin working-position cycle design, when one working position is proceed to wind the wire, another working position will finish loading and unloading, which greatly improve the productivity.
5. Compared with traditional pneumatic conveyor line, the belt line has the predominance of higher conveying speed, less noise, not marking the line. Furthermore flat chain structure combined with ID intelligent identification system can the software and the hardware more flexible to obtain more reasonable and flexible lay-out.Technical Parameter
1. Power volt: 380V± 10%, 50Hz
2. Air source pressure: 0.4~0.7Mpa
3. Productivity: 20~25s/pc
4. Outside diamter of stator: Φ40 ~Φ100
5. Inside diameter of staor: Φ32 ~Φ60
6. Stator stack: 20~60
7. Wire size: Φ0.25 ~Φ1.2
8. Special stator available on request.
Power volt380V± 10%, 50Hz