Toko E308-16 Stainless Steel Welding Consumables with Specification of 2.5mm

TOKO E308-16 Stainless Steel Welding Consumables with Specification of 2.5mmCompany Introduction :TOKO WELDING LLC subsidiary to TOKO Group, our business are specializing in manufacturing & suppling of "Welding Electrode, Welding Wire, Welding Flux, Machinery" products, head office is based in Tokyo, Japan, we are from TOKO (China) office, looking forwards to establish a long-term mutual beneficiary partnership with you!Product Details :
1. Model No.: WeldingElectrode
2. Available size: 2.5x300mm, 2.5x350mm, 3.2x350mm, 4.0x400mm, 5.0x400mm
3. Packing: 5kgs/box, 20kgs/carton, 1ton/pallet24pallets/20ft container.
4. Delivery time: Within 20 days after /confirm/iation
5. Free samples supplied.
6. OEM accepted.
7. Application: The welding electrode E308-16 is widely used on both AC and DC in all positionChemicalcompositionofwire(%)
C
Mn
Si
S
P
standard
≤0.12
0.25-0.60
≤0.40
0.035
≤0.040
typical
0.076
0.35
0.22
0.022
0.026Referencecurrent(AC,DC)
Electrodediameter(mm)
φ2.0
φ2.5
Φ3.2
Φ4.0
Φ5.0
Weldingcurrent(A)
40~70
50~90
90~130
130~210
170~230
Instruction:
1. The oil stains and rust on the welding should be cleared away.
2. Pls use stainless steel brush cleaning bead to avoid iron mied affacting weld quality.
3. Pls Dry 60 minutes at 300-350ºC before welding.
4. Take out a small quantity into 100-150ºC drying cylinder, when operation.
5. Do not carry electrode over half-day using quantities.
6.When swing the electrode, swing width should be within 2.5 times of the electrode diameter.
7. Try to keep short arc and low current, in order to reduce creazing and improve toughness.Photos for your reference