TOKO Flux Cored MIG Welding Wire AWS 5.20 E71T-1C 1.2 Diameter
TOKO AWS A5.20 E71T-1 is formulated to deposit x-ray quality welds in flat, vertical up, horizontal, or overhead positions. E71T-1 is designed for welding low carbon and mild steel, structural and pressure vessel grades. E71T-1 flux core ingredients produce a fast freezing slag that facilitates out of position welds. Bead contour is flat to slightly convex. Slag is easy to remove and low spatter provides easy post weld cleaning.
Instruction
1. Gas- Shielded:Above 99.98% CO2
2. When welding, the gas flow rate shoule keep between 20L/min and 25L/min
3.The oil stains and rust on the welding should be cleared away.
Chemical Composition of Deposited metalCMnSiPSCase0.0521.40.420.0190.011(W/ CO2)Standard≤0.18≤1.75≤0.90≤0.03≤0.03( AWS E71T-1)
Machanical Properties of Deposited metalYP Rel/ MpaTensile Strength/ MpaElongation %Impact ValueCase50557028-20°C/ 120(W/ CO2)Standard≥375490-6602227( AWS E71T-1)
Reference Welding Parameter (DC+)Specification1.21.41.6( Diameter Size mm)Volt23-3024-3625-40Amp150-300170-360200-400mm15-2515-2520-30L/min20-2520-2520-25
Application
Shipbuilding, Offshore, bridge, pressure vessal and general fabrications etc.
Diameter: 0.8mm / 0.9mm/ 1.0mm / 1.2mm / 1.6mm / 2.0mm / 2.4mm
Shipping approval: ABS, LR, BV, GL, DNV, KR, CCSWelding Slags are 100% removed Automatically......TOKO brand Flux Cored Welding Wire E71T-1 1.2MM
Factory Production