A-VS1TP series current mode voltage sensor is a device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC AC or pulsed currents.Electrical data (Ta=25ºC±5ºC,RL=2KΩ,CL=10000PF)TypeA-VS1TP-
100VA-VS1TP-
220VA-VS1TP-
380VA-VS1TP-
500VA-VS1TP-
800VUnitRated voltage(Vpn AC)±100±220±380±500±800VMeasure range(Vp AC)0-±1500-±3300-±5700-±7500-±1000VRated output@Vp=±Vpn ±20±1%mATurns ratio(Np/Ns)3333:1000TMeasure resister54~580ΩSupply voltage+24VPower Consumption≤20+IpX(Np/Ns)mAOffset current@Vp=0 ±0.2mAOffset drift@ -40~+85ºC ≤±0.5mA /ºCLinearity@Vp=0-±Vpn ≤0.2%FSResponse time≤20msGalvanic isolation@ 50HZ,AC,1min 2.5KV
Applications
·Variable speed drives
·Welding machine
·Battery supplied applications
·Uninterruptible Power Supplies (UPS)
·ElectrochemicalRemarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation: 1:OV 2:+24V 3:IOUT
4:+V 5:NC 6:-VDirections for use
1. When the voltage will be measured goes through a sensor, the current will be measured at the output end.(Note: The false wiring may result in the damage of the sensor)
2. Custom design in the different rated input current and the output current are available.
Standards
·UL94-V0.
·EN60947-1:2004
·IEC60950-1:2001
·EN50178:1998
·SJ 20790-2000
General dateValueUnitOperating temperature(TA)-40 to +85ºCStorage temperature(TS)-40 to +125ºCMass(approx) (M)43g