CS310 Electrochemical Workstation/Potentiostat/Galvanostat with Eis

CS310 Potentiostat / Galvanostat (electrochemical workstation) contains a fast digital function generator, high-speed data acquisition circuitry, a potentiostat and a galvanostat. With high performance in stability and accuracy with advanced hardware and well-functioned software, it is a comprehensive research platform for corrosion, batteries, electrochemical analysis, sensor, life science and environmental chemistry etc.
APPLICATION
1) Corrosion mechanism of metals in water, concrete and soil, etc.
2) Li-ion battery, solar cell, fuel cell, supercapacitor, new materials, photoelectronic materials;
3) Electrochemical analysis and sensor;
4) Reaction mechanism of electrosynthesis, electrodeposition (electroplating), anodic oxidation, etc.
5) Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection.HARDWAREFEATURES
Dual-channel high-speed 16bit/high-accuracy 24bit AD converter;
Built-in frequency response analyzer(FRA), frequency range: 10μHz~1MHz;
Built in high-power Potentiostat/Galvanostat/Zero resistance ammeter(ZRA);
Voltage control range: ±10V; Compliance voltage: ±21V ;
Current control range: ±2A;
Potential resolution: 10μV; current resolution 1pA.SOFTWARE FEATURES
CS studio software provides users a versatile smoothing/differential/ integration kit, which can complete the calculation of peak height, peak area and peak potential of CV curves.
CS studio also provides powerful non-linear fitting on Butler-Volmer equation of polarization curve. It can calculate Tafel slope, corrosion current density, limitation current, polarization resistance, corrosion rate. It can also calculate the power spectrum density, noise resistance and noise spectrum resistance based on the electrochemical noise measurements.
CS Studio software can achieve real time saving of the measuring data. The data can be automatically saved even in case of sudden power off.
CS studio kit has a built-in versatile timing policy for combined measurements, which can facilitate the automation of experiments and save time.
Battery analysis: charge & discharge efficiency, capacity, specific capacitance, charge & discharge energy etc.
EIS analysis: Bode, Nyquist, Mott-Schottky plot
Specifications
Support 2-, 3- or 4-electrode system
Potential control range: ±10V
Current control range: ±2A
Potential control accuracy: 0.1%xfull range±1mV
Current control accuracy: 0.1%xfull range
Potential resolution: 10μV (>100Hz), 3μV (<10Hz)
Current sensitivity: 1pA
Rise time: <1μs (<10mA), <10μs (<2A)
Reference electrode input impedance: 1012Ω||20pF
Current range: 2A~2nA, 10 ranges
Compliance voltage: ±21V
Maximum current output: 2.0A
CV and LSV scan rate: 0.001mV~10,000V/s
CA and CC pulse width: 0.0001~65,000s
Current increment during scan: 1mA@1A/ms
Potential increment during scan: 0.076mV@1V/ms
AD data acquisition: 16bit@1 MHz,20bit@1 kHz
DA Resolution: 16bit, setup time: 1μs
Minimum potential increment in CV: 0.075mV
IMP frequency: 10μHz~1MHz
Low-pass filters: covering 8-decade
Potential and current range: automatic
Communications Interface: USB
Operating System: Windows 2000/XP/ Win7/Win8/Win10
Instrument size: 365 x 305 x160mm, weight: 6.5kgElectrochemical impedance spectroscopy(EIS)
Signal generator
Frequency range: 10μHz~1MHz
Frequency accuracy: 0.005%
AC signal amplitude: 1mV~2500mV
Signal resolution: 0.1 mV RMS
DC Bias: -10~+10V
Output impedance: 50Ω
Waveform: Sine wave, triangular wave and square wave
Wave distortion: <1%
Scan mode: Logarithmic/linear, increase/decrease
Signal analyzer
Integral time: minimum: 10ms or the longest time of a cycle
Maximum: 106cycles or 105s
Measurement delay: 0~105sSOFTWARE
Techniques included in CS310 potentiostat galvanostat
Open Circuit Potential (OCP), Potentiostatic (I-T measurement), Galvanostatic, Potentiodynamic (Tafel plot), Galvanodynamic
Multi-Potential Steps, Multi-Current Steps, Potential Stair-Step (VSTEP), Galvanic Stair-Step (ISTEP)
Chronopotentiometry (CP), Chronoamperometry (CA), Chronocoulometry (CC)
Cyclic Voltammetry (CV), Linear Sweep Voltammetry (LSV)
EIS vs Frequency (IMP), EIS vs Time (IMPT), EIS vs Potential (IMPE)
Electrochemical Noise (EN), Zero Resistance Ammeter (ZRA), Electrochemical Potentiokinetic Reactivation(EPR)
Battery charge and discharge, Galvanostatic charge and discharge
Data Logger, Electrochemical stripping/deposition, Bulk electrolysis with CoulometryModels comparisonTechniques / electrochemical methodsCS150CS300CS310CS350Open Circuit Potential (OCP)√√√√Potentiostatic (I-T curve)√√√√Galvanostatic√√√√Potentiodynamic(Tafel plot)√√√√Galvanodynamic√√√√Multi-Potential Steps√√√√Multi-Current Steps√√√√Potential Stair-Step (VSTEP)√√√√Galvanic Stair-Step (ISTEP)√√√√Chronopotentiometry (CP)√√√Chronoamperometry (CA)√√√Chronocoulometry (CC)√√√Cyclic Voltammetry (CV)√√√√Linear Sweep Voltammetry (LSV)√√√√Staircase Voltammetry (SCV) #√√Square wave voltammetry (SWV) #√√Differential Pulse Voltammetry (DPV)#√√Normal Pulse Voltammetry (NPV)#√√Differential Normal Pulse Voltammetry (DNPV)#√√ACvoltammetry (ACV) #√√2nd Harmonic A.C.Voltammetry (SHACV)√√Differential Pulse Amperometry (DPA)√Double Differential Pulse Amperometry (DDPA)√Triple Pulse Amperometry (TPA)√Integrated Pulse Amperometric Detection (IPAD)√EIS vs Frequency (IMP)√√EIS vs Time (IMPT)√√EIS vs Potential (IMPE)(Mott-Schottky)√√Electrochemical Potentiokinetic Reactivation(EPR)√√√√Electrochemical Noise(EN)√√√√Zero resistance Ammeter (ZRA)√√√√Battery charge and discharge√√√√Galvanostatic charge and discharge(GCD)√√√√Data Logger√√√√Electrochemical stripping/deposition√√√Bulk electrolysis with Coulometry (BE)√√√√
Cutomers' Feedback
I am writing this letter to recommend this service of M/S Wuhan Corrtest Instrument Corp., Ltd to you. Our group has been working with potentiostat system manufactured by Wuhan Corrtest Instrument Corp., Ltd and quite satisfied with the same. As and when required they provide online technical support. Though I have not purchased equipment consumables yet, but I believe they will supply it within a short notice as they have supplied the system to us within a short time. Moreover, free software system up-gradation adds more convenience using this system.""The system has been installed and working fine. We appreciate the system and support service they provided to us. We have no hesitation in recommending them for purchase of any electrochemistry through them"
"Our company procured a potentiostat system (CS310) from M/S Wuhan Corrtest Instrument Co., Ltd. in June 2015.
We have been using the potentiostat system manufactured by Wuhan Corrtest Instrument Corp., Ltd. and are quite satisfied with the same. The system was easy to set up and the performance to date has been satisfactory.
The unit was delivered promptly and their representative, Ms Yushan Zhang, was very responsive in responding to product queries."
based on our experience using the system from Wuhan Corrtest Instrument Corp., Ltd. thus far was a positive one. "
"The company offers high quality service. We can say that we have always been satisfied by their work.
I can confidently recommend Wuhan Corrtest Instrument Co., Ltd. as a good and reliable supplier, and experts in their field."